Browse by University and Academic Department

Thesis

Alahmadi, Yaser (2016) On the application of an eddy viscosity turbulence model sensitized to rotation/curvature to the cyclone separator. PhD thesis, University of Sheffield.

Almagirby, Almaky AAF (2016) Understanding Vibration Transmitted to the Human Finger. PhD thesis, University of Sheffield.

Ascani, Daniele (2016) Individualised Modelling for Preoperative Planning of Total Knee Replacement Surgery. PhD thesis, University of Sheffield.

Botov, S (2016) Investigation on Novel Polymer Filter Medium for Filtration of Automotive Lubricants. MPhil thesis, University of Sheffield.

Bruce, Thomas (2016) Analysis of the premature failure of wind turbine gearbox bearings. PhD thesis, University of Sheffield.

Buckman, AH (2016) An Exploration of the Applications of Increased Information Availability in Smart Buildings. PhD thesis, University of Sheffield.

Campos Marin, Ana (2016) In silico study of the mechanisms of cell deposition into 3D rapid prototyping scaffolds under in vitro hydrodynamic conditions. PhD thesis, University of Sheffield.

Carranza Chavez, Francisco Javier (2016) 3D EXPERIMENTAL STUDY OF THE MOTION OF SINGLE PARTICLES USING IMAGE-BASED TECHNIQUES. PhD thesis, University of Sheffield.

Chandrasekhar, Kartik (2016) Mechanical and Microstructural Behaviour of Tangled Metal Wire Devices. PhD thesis, University of Sheffield.

Chen, Hao (2016) Numerical Study of Trailing Edge Flow Control for Horizontal Axis Wind Turbines. PhD thesis, University of Sheffield.

Chen, Yuan (2016) Verification and Validation of MicroCT-based Finite Element Models of Bone Tissue Biomechanics. PhD thesis, University of Sheffield.

De Santis, Andrea (2016) CFD analysis of CO2- and H2O-diluted combustion in gas turbines. PhD thesis, University of Sheffield.

Di Marco, Roberto (2016) Kinematic modelling of the foot-ankle complex for gait analysis. PhD thesis, University of Sheffield.

Elshukri, Fathi A. (2016) An Experimental Investigation and Improvement of Insulated Rail Joints (IRJs) End Post Performance. PhD thesis, University of Sheffield.

Geca, Piotr (2016) Assessment of TPUs For Use in The Laser Sintering Process. PhD thesis, University of Sheffield.

Gonzalez Garcia, Veronica Palma (2016) Modelling of active flow control devices using hybrid RANS/LES techniques. PhD thesis, University of Sheffield.

Gonzalez Sanchez, Victor (2016) Development of a dexterity assessment method. PhD thesis, University of Sheffield.

Goodwin, Jonathan (2016) Multi-train trajectory planning. PhD thesis, University of Sheffield.

Harrison, Neil J (2016) Selective Laser Melting of Nickel Superalloys: solidification, microstructure and material response. PhD thesis, University of Sheffield.

Hinchliffe, Benjamin Lee (2016) Using Surface Sensitivity for Adjoint Aerodynamic Optimisation of Shock Control Bumps. PhD thesis, University of Sheffield.

Howard, Thomas Peter (2016) Development of a Novel Bearing Concept for Improved Wind Turbine Gearbox Reliability. PhD thesis, University of Sheffield.

Kaka, Diyar (2016) Dynamic mechanical properties of multi-scale carbon fibre reinforced PEEK. PhD thesis, University of Sheffield.

Khosh Aghdam, Sohrab (2016) Turbulent drag reduction through wall-forcing methods. PhD thesis, University of Sheffield.

Knapton, J.N. (2016) Application of Novel Flame Acceleration Enhancing Obstacles to Pulse Detonation Engines. PhD thesis, University of Sheffield.

Krier, Peter John (2016) Low Maintenance Bearings for Aircraft Landing Gear. PhD thesis, University of Sheffield.

Lestrange, Charis (2016) Effect of surface roughness on quality perception of Laser Sintered (LS) parts. PhD thesis, University of Sheffield.

Lopez Botello, Omar Eduardo (2016) Simulation of Microstructural Evolution of Selective Laser Melting of Metal Powders. PhD thesis, University of Sheffield.

Marensi, Elena (2016) Nonlinear unsteady disturbances generated by the interaction of free-stream vorticity with a laminar boundary layer. PhD thesis, University of Sheffield.

Mathur, Akshat (2016) Study of accelerating and decelerating turbulent flows in a channel. PhD thesis, University of Sheffield.

Merino Perez, Julian Luis (2016) The effect of resin on tool wear in the drilling of CFRP composites. EngD thesis, University of Sheffield.

Mohd Mustafah, Anas (2016) Proposed Framework of Building Nonlinear Models: A Study using the Bouc-Wen Hysteretic Model. PhD thesis, University of Sheffield.

Naumann, Jack (2016) Acoustic Emission Monitoring of Wind Turbine Bearings. PhD thesis, University of Sheffield.

Navarro Zafra, Joaquin (2016) Computational Mechanics of fracture on advanced aerospace structures. PhD thesis, University of Sheffield.

Noble, Christopher (2016) Experimental and numerical techniques for characterising catheter-induced blood vessel damage: towards tools for improvement of intravascular catheter design. PhD thesis, University of Sheffield.

O'Connor, Dominic (2016) A Novel Heat Recovery Device for Passive Ventilation Systems. PhD thesis, University of Sheffield.

Pancani, Silvia (2016) Assessing residual neck mobility when wearing a cervical orthosis: an application in patients with Motor Neurone Disease. PhD thesis, University of Sheffield.

Ramadan, Dlair (2016) Ultrasonic Reflection Technique for Measuring Contact Conditions at the Tool Chip Interface. PhD thesis, University of Sheffield.

Ratner, Alon (2016) Hybrid steel wire strands with carbon fibre reinforced plastics. PhD thesis, University of Sheffield.

Schirru, Michele (2016) Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In-Situ. PhD thesis, University of Sheffield.

Seemuang, Nopparat (2016) Non-destructive Evaluation and Condition Monitoring of Tool Wear. PhD thesis, University of Sheffield.

Shariatzadeh, Maryam (2016) The Effect of Mechanical Stimulation on Osteogenesis of Cell Seeded Collagen Microspheres. PhD thesis, University of Sheffield.

Sithole, Henry (2016) The Electricity Generation Infrastructure Transition to 2050: A Technical and Economic Assessment of the United Kingdom Energy Policy. PhD thesis, University of Sheffield.

Storm, F A (2016) Gait monitoring: from the clinics to the daily life. PhD thesis, University of Sheffield.

Suzuki, Hiroyuki (2016) Bearing Surface Optimisation on Hydrodynamic Lubrication Film with Vibration-Assisted Machining and Ultrasound Reflectometry. PhD thesis, University of Sheffield.

Tiboaca, Oana D (2016) On the Application of the Reversible Jump Markov Chain Monte Carlo Method within Structural Dynamics. PhD thesis, University of Sheffield.

Ubogu, Emamode Akpofure (2016) Non-Conventional Pollutant Species Measurement and Prediction from a Gas Turbine. PhD thesis, University of Sheffield.

Williams, Gabrielle (2016) Modelling Paediatric Bones: Estimating mechanical strength of paediatric femurs using a personalised computational modelling technique. MPhil thesis, University of Sheffield.

Yang, Jiansheng (2016) Vision-based Measurement for Combustion and Vibration Studies. PhD thesis, University of Sheffield.

Zhang, Xueqing (2016) Vibrotactile Feedback for Application on Mobile Touch Screen Devices: Effects with Age. PhD thesis, University of Sheffield.

da Rocha Pinto, João M. (2016) Wall-based feedback control of a compressible laminar boundary layer subjected to free-stream vortical disturbances. PhD thesis, University of Sheffield.

hepburne scott, malcolm (2016) Control Rod Performance Modelling. PhD thesis, University of Sheffield.

ma, zhen (2016) Two-Colour Temperature Measurement Based on High Speed Imaging. PhD thesis, University of Sheffield.

wickramasinghe, kasun (2016) Shape Memory Alloys in the design of morphing stator vanes. PhD thesis, University of Sheffield.