Browse by University and Academic Department

Thesis

AL-ARFI, ISMAIL MASOUD ORCID: https://orcid.org/0000-0002-1147-8945 (2022) Modelling and optimisation of decentralised hybrid solar biogas system to power an organic Rankine cycle (ORC-Toluene) and air gap membrane distillation (AGMD) for desalination and electric power generation. PhD thesis, University of Sheffield.

Albadi, Ahmed ORCID: https://orcid.org/0000-0002-4564-1456 (2022) Investigation of fire extinguishment mechanisms at microscopic level. PhD thesis, University of Sheffield.

Alshehri, Faisal ORCID: https://orcid.org/0000-0002-1201-5168 (2022) The performance of vertical ground source heat pumps (GSHPs) in hot dry climates Saudi Arabia as a case study. PhD thesis, University of Sheffield.

Arrospide Garro, Iraitz (2022) FINISH-MACHINING STRATEGIES FOR BLADED DISKS. EngD thesis, University of Sheffield.

Briggs, Eloïse Virginia ORCID: https://orcid.org/0000-0002-7665-2115 (2022) Wearable Sensors for Equine Lameness Quantification. PhD thesis, University of Sheffield.

Butcher, Thomas ORCID: https://orcid.org/0000-0002-7996-1132 (2022) Understanding and modelling low adhesion risk in the wheel-rail interface. PhD thesis, University of Sheffield.

Cao, Ling Fang ORCID: https://orcid.org/0000-0002-8068-9789 (2022) Development of a GPU-accelerated flow simulation method for wind turbine applications. PhD thesis, University of Sheffield.

Champneys, Max ORCID: https://orcid.org/0000-0002-3037-7584 (2022) Challenges in nonlinear structural dynamics: New optimisation perspectives. PhD thesis, University of Sheffield.

Clarke, Benjamin Paul ORCID: https://orcid.org/0000-0002-2868-9917 (2022) Development of Ultrasonic Techniques for Rolling Element Bearing Monitoring. PhD thesis, University of Sheffield.

Copley, Royce (2022) Use of Ultrasonic Pulses to Detect State of Charge and State of Health in Lithium-Ion Batteries. PhD thesis, University of Sheffield.

Curry, Daniel Francis (2022) Development and Optimisation of Analytical Techniques for Non-Woven Flue Gas Filtration Media. EngD thesis, University of Sheffield.

Dai, Rui (2022) Investigation of Damage Initiation and Propagation from Non-metallic Inclusions in Raceway Subsurface of Wind Turbine Gearbox Bearings. PhD thesis, University of Sheffield.

Dell, Alexander (2022) Low Frequency Attenuation of Sound with Acoustic Metamaterials. PhD thesis, University of Sheffield.

Demiryurek, Sifa Gul ORCID: https://orcid.org/0000-0002-9888-0581 (2022) Periodically Arranged Nonlinear Passive Particle Dampers Under Low-Amplitude Excitation. PhD thesis, University of Sheffield.

Fort, David (2022) Ultrasonic Viscosity Sensors to Measure Degradation and Contamination in a Dielectric Battery Coolant. PhD thesis, University of Sheffield.

Garcia Panizo, Julian Alberto (2022) Investigating the Tribological Behaviours of a Jet Engine’s Abrasive Rotor and Stator Vane Contact. PhD thesis, University of Sheffield.

Genc, Kubra (2022) Processing of NdFeB for Electric Motor Applications Using Selective Laser Melting. PhD thesis, University of Sheffield.

Hadjisoteriou, Andreas ORCID: https://orcid.org/0000-0001-9438-6722 (2022) Investigation of material removal mechanism and thermal response of compressor abradable materials. PhD thesis, University of Sheffield.

Hayford, Claude Fiifi (2022) Musculoskeletal Models to Aid in Clinical Decision-Making in Children with Cerebral Palsy. PhD thesis, University of Sheffield.

Haywood-Alexander, Marcus (2022) Development of Novel Tools for Application of Ultrasonic Guided Waves in Fibre-Composites. PhD thesis, University of Sheffield.

Holdich, Thomas (2022) Ultrasonic NDT for In-Process Strip Gauging in Metal Rolling. PhD thesis, University of Sheffield.

Hughes, Aidan John ORCID: https://orcid.org/0000-0002-9692-9070 (2022) On risk-based decision-making for structural health monitoring. PhD thesis, University of Sheffield.

Karas, Busra (2022) Additive Manufacturing of Carbon Fibre Reinforced Polymer Composites. PhD thesis, University of Sheffield.

Li, Zhengwei (2022) Acoustic Methods for Robot Communication in Pipes. PhD thesis, University of Sheffield.

Li, Zhikun (2022) Development of wrinkling modelling and testing methods for shear metal spinning. PhD thesis, University of Sheffield.

Matthaiou, Ioannis (2022) On robust statistical outlier analysis for damage identification. PhD thesis, University of Sheffield.

McMullen, Kieran ORCID: https://orcid.org/0000-0003-1477-3082 (2022) Industrial Robotics for Advanced Machining. MPhil thesis, University of Sheffield.

Mesaritis, Michael ORCID: https://orcid.org/0000-0002-1724-5958 (2022) Rail Surface Quality Improvements from Utilising a Novel High Speed Superabrasive Grinding Approach. PhD thesis, University of Sheffield.

Monoranu, Marius ORCID: https://orcid.org/0000-0003-4759-0223 (2022) The Effects of Particle Reinforcements on Chip Formation and Machining Induced Damage in cutting of modified epoxy Carbon Fibre Reinforced Polymers. PhD thesis, University of Sheffield.

OKEREKE, ISAAC ORCID: https://orcid.org/0000-0003-2480-8699 (2022) Novel Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells. PhD thesis, University of Sheffield.

Ozsoy, Muhammet ORCID: https://orcid.org/0000-0002-3069-7377 (2022) Robotically Assisted Active Vibration Control in Milling. PhD thesis, University of Sheffield.

Pan, Muyi (2022) Further Investigation of Hydrogen-air Diffusion Flame Ignition Behaviour and Flame Colour. PhD thesis, University of Sheffield.

Paul, Sourabh ORCID: https://orcid.org/0000-0001-8990-0539 (2022) Binder jetting of aqueous polyvinyl alcohol for additive manufacturing of Inconel 718. PhD thesis, University of Sheffield.

Perez Cervantes, Vicente Alejandro (2022) Tensile and fatigue behaviour of short glass fibre reinforced plastic composites at elevated temperature. PhD thesis, University of Sheffield.

Pietrow, Nikita (2022) Development of a Three-Dimensional Predictive Assessment Technique for Single Layer Point Grinding Tool Surfaces. EngD thesis, University of Sheffield.

Pratt, Liam ORCID: https://orcid.org/0000-0001-8331-7422 (2022) PISA Block Copolymers prepared via RAFT Polymerisation for use as Friction Modifiers. PhD thesis, University of Sheffield.

Qansh, Hassan ORCID: https://orcid.org/0000-0003-2100-189X (2022) Aerodynamic Analysis on Modified Horizontal-Axis-Wind-Turbine. PhD thesis, University of Sheffield.

Rahimov, Eldar ORCID: https://orcid.org/0000-0001-9557-5808 (2022) Investigation of wear mechanisms in abradable-blade contacts. PhD thesis, University of Sheffield.

Sastraatmaja, Arman (2022) Experimental Process Development and Techno-economic Assessment of In-Situ Biomethanation of Carbon Dioxide in Biowaste Anaerobic Digesters. PhD thesis, University of Sheffield.

Seers, Benjmain ORCID: https://orcid.org/0000-0003-1297-1480 (2022) An experimental investigation of residual stress and strain in rapidly cured fibre reinforced composites. PhD thesis, University of Sheffield.

Stannard, Anthony (2022) Efficiency Improvements to Adjoint-Based Aeroelastic Optimisations using a Trim-Corrected and Hybrid Mesh Deformation Strategy. PhD thesis, University of Sheffield.

Sultan, Ali J. ORCID: https://orcid.org/0000-0002-1635-0342 (2022) Techno-economic assessment and optimization of wind and concentrating solar power with thermal energy storage under arid climatic conditions. PhD thesis, University of Sheffield.

Tian, Yufei (2022) A dynamic mesh approach to the 2D CFD modelling of ash deposition in solid fuel combustion. MPhil thesis, University of Sheffield.

Tipuric, Matt ORCID: https://orcid.org/0000-0002-4003-2993 (2022) On semi-active inerters for improving machining productivity. PhD thesis, University of Sheffield.

Tsialiamanis, Georgios ORCID: https://orcid.org/0000-0002-1205-4175 (2022) A data-driven approach to modelling structures. PhD thesis, University of Sheffield.

Vincekovic, Luka (2022) Multidisciplinary Optimisation of High Pressure Turbine Blade Tips. PhD thesis, University of Sheffield.

Wagner, Rasmus ORCID: https://orcid.org/0000-0001-6052-2888 (2022) In vitro damage quantification of medical device material interaction with endothelial cells. PhD thesis, University of Sheffield.

Wingham, James ORCID: https://orcid.org/0000-0002-8331-9206 (2022) Antimicrobial efficacy of laser sintered polyamide 12 / silver microcomposites. PhD thesis, University of Sheffield.

Yang, Yue ORCID: https://orcid.org/0000-0001-9263-9677 (2022) Longitudinal Rail Stress Measurement using Ultrasound. PhD thesis, University of Sheffield.

Zhang, Jing (2022) The Study of Combustion and Emission Characteristics of Partially Cracked Ammonia and Chemiluminescent Emission for Hydrocarbon Fuel Based on the Chemical Kinetic Mechanisms. PhD thesis, University of Sheffield.

Zhang, Yuchen ORCID: https://orcid.org/0000-0002-6669-3132 (2022) Experimental and Numerical Investigation of Fire Whirl’s Impact on the Firebrand’s Lofting Mechanism. PhD thesis, University of Sheffield.

elias, adrian (2022) Comparison of two musculoskeletal models to evaluate glenohumeral joint kinematics and dynamics. MPhil thesis, University of Sheffield.