Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS
Group by: Thesis author | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | P | R | S | T | V | W | Y | Z
Number of items: 56.

A

AL-HAMADANI, HAIDER RAHMAN DAWOOD (2018) System Dynamic Modelling of Wind Turbine Gearbox Under Normal and Transient Operating Conditions. PhD thesis, University of Sheffield.

AL-TAMEEMI, WAMEEDH TURKI MOHAMMAD (2018) Two-phase flow in straight pipes and across 90 degrees sharp-angled mitre elbows. PhD thesis, University of Sheffield.

Abuserwal, Ahmed (2018) Pressure Drop and Forced Convective Heat Transfer in Porous Media. PhD thesis, University of Sheffield.

Akindele, Ojo David (2018) Influence of Additives on Agglomeration Behaviours/Formation in a Laboratory - Scale Fixed Bed Combustion of Biomass Fuels. PhD thesis, University of Sheffield.

Al-Bakri, Basim Abdulrazzak (2018) Micro-channel air cooled condenser performance with two-phase flow of zeotropic refrigerant at high ambient temperatures. PhD thesis, University of Sheffield.

Al-Obaidi, Anwer (2018) Ultrasonic Joining of Metal-Polymer Surfaces. PhD thesis, University of Sheffield.

Al-Tameemi, Hamza Abdulrasool Hussain (2018) Effect of Surface Traction and Non-Metallic Inclusions on the Premature Failure of Wind Turbine Gearbox Bearings. PhD thesis, University of Sheffield.

Al-rubaiy, Ahmed Abed Ali Ghaidan (2018) The Effect of Surface Roughness and Free Stream Turbulence on the Flow and Heat Transfer around a Circular Cylinders. PhD thesis, University of Sheffield.

Alharbi, Hossen H S M (2018) Leak Detection in Long Pipelines Systems. PhD thesis, University of Sheffield.

Alobaid, Mohammad (2018) Determining the performance characteristics of flat plate and photovoltaic thermal collector for sustainable cooling systems integration. PhD thesis, University of Sheffield.

Altai, Zainab (2018) Prediction of The Strength of Human Long Bone Using CT Based Finite Element Method. PhD thesis, University of Sheffield.

Alvarenga, Claudia (2018) Entrainment of free-stream vortical disturbances in the entrance region of confined flows. PhD thesis, University of Sheffield.

Avcioglu, Emir (2018) Measurement of Surface Deflection in Rolling Bearing by Ultrasonic Reflection. PhD thesis, University of Sheffield.

B

Bellas, Jean-Michel (2018) Gas turbines for carbon capture. PhD thesis, University of Sheffield.

Bin Abdullah, Nur Azam (2018) Numerical Modelling and Interaction of Crack and Aeroelastic Behaviour of Composite Structure for Aerospace Applications. PhD thesis, University of Sheffield.

Bouras, Ioannis (2018) CFD modeling of wind turbine wakes. PhD thesis, University of Sheffield.

Butterfield, Joseph (2018) Deriving further information from the leak signal in water distribution pipes. EngD thesis, University of Sheffield.

C

Cramphorn, EA (2018) The Viability of Image Registration as a Method for the Quantification of Displacement in Penetrating Impact Experiments. PhD thesis, University of Sheffield.

D

De Castro Carvalho Simoes, Marcus (2018) Equilibrium and Process Analysis Involving Carbon Capture and Storage. PhD thesis, University of Sheffield.

Duboust, Nicolas (2018) Edge Trimming of CFRP- Surface Roughness Measurement and Prediction. EngD thesis, University of Sheffield.

E

Elbadawi, Mohammed (2018) Fabrication of Calcium Phosphate Scaffolds via Honeycomb Extrusion. PhD thesis, University of Sheffield.

Evans, Martin David (2018) Performance Assessment of Friction Management Products in the Wheel-Rail Interface. PhD thesis, University of Sheffield.

F

Farias Moguel, Oscar (2018) The spatiotemporal coherence as an indicator of the stability in swirling flows. PhD thesis, University of Sheffield.

G

Galindo, Jesus (2018) Design and Development process for medical furniture through a case study. MPhil thesis, University of Sheffield.

Gardner, Paul (2018) On Novel Approaches to Model-Based Structural Health Monitoring. PhD thesis, University of Sheffield.

H

Hu, Fangting (2018) Economic and emission dispatch under the Electricity Market Reform. PhD thesis, University of Sheffield.

Hunter, Andrew (2018) Ultrasonic Measurements of the Strip Thickness, Lubricant Film Thickness, Roll Deflection and Roll Stress in the Roll Bite in the Cold Rolling of Steel. PhD thesis, University of Sheffield.

harmon, m (2018) Understanding Application and Tribological Mechanisms of Lubricants and Friction Modifiers in the Wheel-Rail Interface. PhD thesis, University of Sheffield.

I

Iakovidis, Iason (2018) On Nonstationarity from Operational and Environmental Effects in Structural Health Monitoring Bridge Data. PhD thesis, University of Sheffield.

J

John, Alistair (2018) IMPROVING JET ENGINE AERODYNAMIC DESIGN VIA NOVEL COMPONENT SHAPING AND ANALYSIS. PhD thesis, University of Sheffield.

K

Khalil, Yas (2018) 3D Printing of Activated Carbon/UHMWPE Polymer Composite using Laser Sintering. PhD thesis, University of Sheffield.

Knox, Stephen T. (2018) A Fundamental Understanding of the Factors Controlling the Chemical Performance of Model Polymer Networks. PhD thesis, University of Sheffield.

L

Lee, Ching Hao (2018) FIRE RETARDANT BEHAVIOR OF KENAF FIBRE REINFORCED FLOREON COMPOSITE. PhD thesis, University of Sheffield.

Lee, Z. S. (2018) Towards real-time imaging of strain in soft tissue. PhD thesis, University of Sheffield.

Li, Xiangwei (2018) Measuring Friction at an Interface Using Nonlinear Ultrasonic Response. PhD thesis, University of Sheffield.

Liu, Xuanang (2018) Backbone Curve Analysis of Nonlinear Mechanical Systems. PhD thesis, University of Sheffield.

M

Manoli, Stella (2018) The effects of processing on performance and utility in plant fibre-based composites. PhD thesis, University of Sheffield.

Meor Ahmad, Meor Iqram (2018) STRUCTURAL INTEGRITY OF DUCTILE MECHANICAL COMPONENTS SUBJECTED TO CREEP: DAMAGE AND FRACTURE MODELLING. PhD thesis, University of Sheffield.

Mohd Amin, Muhsin (2018) Instability and mixing of flow of supercritical water between subchannels. PhD thesis, University of Sheffield.

Mohd Tamyis, Najihah (2018) Effect of carbon nanotubes length on thermal and mechanical properties of carbon resin and carbon fibre reinforced polymer. PhD thesis, University of Sheffield.

N

Norazman, Farhana (2018) Realising the Potential of the High Speed Sintering Process for Industrial Implementation. PhD thesis, University of Sheffield.

P

Parikhaah, Parhaam (2018) Study of Fluid Penetration and Lubrication in a Threaded Contact. PhD thesis, University of Sheffield.

R

Rahim, Sharafiz (2018) Investigating the Effect of Variable Mass Loading in Structural Health Monitoring from a Machine Learning Perspective. PhD thesis, University of Sheffield.

Raja Arif, Raja Muhammad Aslam (2018) Water and Thermal Management of PEM Fuel Cells. PhD thesis, University of Sheffield.

Ray, Nathan (2018) Correlation between Machining Monitoring Signals, Cutting Tool Wear and Surface Integrity on High Strength Titanium Alloys. EngD thesis, University of Sheffield.

Rohaizat, Nurrasyidah Izzati (2018) Fracture of Automotive High Strength Steels. PhD thesis, University of Sheffield.

S

Sangtani, Navin (2018) A study on the validity of the Lattice Boltzmann Method as a way to simulate high Reynolds number flows past porous obstacles. PhD thesis, University of Sheffield.

Shi, Haichen (2018) On Nonlinear Cointegration Methods for Structural Health Monitoring. PhD thesis, University of Sheffield.

T

Tang, Ning (2018) Design of adjustable tuned mass dampers employing nonlinear elements. PhD thesis, University of Sheffield.

V

van Veen, Bart (2018) Variability in neuromotor control of the musculoskeletal system dynamics - A stochastic modelling approach. PhD thesis, University of Sheffield.

W

WANG, YIRAN (2018) Development of Advanced Imaging Based Diagnostics for Flame Studies. PhD thesis, University of Sheffield.

White, Ben (2018) Using Tribo-Chemistry Analysis to Understand Low Adhesion in the Wheel-Rail Contact. PhD thesis, University of Sheffield.

Williams, J P R (2018) A novel method for solar heating of domestic water, with the opinions of main actors and consumers considered for its diffusion in the UK. MPhil thesis, University of Sheffield.

Y

Yu, Songyang (2018) Imaging-Based Fault Detection of Wind Turbines. PhD thesis, University of Sheffield.

Z

Zhang, Tianwei (2018) ON TREED GAUSSIAN PROCESSES FOR MODELLING STRUCTURAL DYNAMIC SYSTEMS. PhD thesis, University of Sheffield.

Zheng, Lukai (2018) Combustion Visualisation Monitoring Using High Speed Imaging. PhD thesis, University of Sheffield.

This list was generated on Fri Dec 9 01:13:41 2022 GMT.