Browse by University and Academic Department

A

Afzal, Muhammed Raheel (2017) Material Flow Analysis & Life Cycle Assessment Of Critical alloys in the Steel industry. PhD thesis, University of Sheffield.

Al-Bermany, Ehssan (2017) Polymer/Graphene Oxide Nanocomposites: Surface Adsorption and Interfaces. PhD thesis, University of Sheffield.

Alali, M (2017) Through-thickness microstructure and mechanical properties of electron beam similar welded AISI 316L stainless steel and dissimilar welded AISI 316L / Ti6Al4V. PhD thesis, University of Sheffield.

Alshoaibi, Adil (2017) Electrical Properties of Rare Earth-Doped Barium Titanate. PhD thesis, University of Sheffield.

B

Backhouse, Daniel (2017) A Study of the Dissolution of Nuclear Waste Glasses in Highly-Alkaline Conditions. PhD thesis, University of Sheffield.

Bailey, Daniel J (2017) Ceramic wasteforms for wastes arising from potential future fuel cycles. PhD thesis, University of Sheffield.

Beckett, SJ (2017) Establishing a method to transport and deliver adipose derived stem cells to chronic wounds. MPhil thesis, University of Sheffield.

Benson, Lyndsey (2017) Production and development of titanium alloys derived from synthetic rutile using electrochemical deoxidation. PhD thesis, University of Sheffield.

Boast, Luke (2017) Investigation of the Thermal Treatment of Higher Activity Waste. PhD thesis, University of Sheffield.

Bradley, Ruth (2017) Optimisation of Fe3O4 thin films and nanostructures for atom trapping applications. PhD thesis, University of Sheffield.

Bywater, Gary Edward (2017) A study on the microstructure and high temperature oxidation of Nb-silicide based alloys with Hf and Ge or Al additions and the NbCr2 Laves phase. PhD thesis, University of Sheffield.

C

Casey, Laura (2017) Synthesis, structure and characterisation of advanced ceramics for actinide immobilisation. PhD thesis, University of Sheffield.

Cox, Adam (2017) Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components. EngD thesis, University of Sheffield.

D

Dempster, William (2017) Glass Coatings for Automobile Applications. PhD thesis, University of Sheffield.

E

Eleftheriou, Lygia (2017) Study of macromolecule-mineral interactions on nuclear related materials. PhD thesis, University of Sheffield.

F

Fadhil, Ghaiath Abbas (2017) The Role of Microstructure on the Performance of Sintered Nd-Fe-B Magnets. PhD thesis, University of Sheffield.

Foeller, Philip York / PY (2017) Novel materials and routes for rare-earth-free BaTiO3-based ceramics for MLCC applications. PhD thesis, University of Sheffield.

G

GHADYANI, MOHAMMAD HOSSEIN (2017) Study of the Microstructure and Oxidation of Alloys of the Al-Hf-Nb-Si-Ti System. PhD thesis, University of Sheffield.

H

Heath, J. P. (2017) Simulation of Impedance Spectroscopy in Electroceramics Using a Finite Element Method. PhD thesis, University of Sheffield.

I

Indeir, Fahima (2017) Development of an advanced DC-polarisation/AC-impedance cyclic test to evaluate the corrosion of electrically-conductive coating/substrate systems. PhD thesis, University of Sheffield.

J

James, Kris (2017) The design and performance of a civil marine reactor with regard to the thermal performance of the fuel. PhD thesis, University of Sheffield.

Jenkins, Sarah Nield Morrish (2017) Mechanical properties and structural evaluation of diamond structure Ti6Al4V lattices made by Electron Beam Melting. PhD thesis, University of Sheffield.

K

Ke, Xinyuan (2017) Improved Durability and Sustainability of Alkali-Activated Slag Cements. PhD thesis, University of Sheffield.

Khalid, Omar (2017) An Investigation into the Effect of Carbon and Niobium on Microstructure Development during Reheating of Steel. PhD thesis, University of Sheffield.

Kourtis, Lampros (2017) Electron Beam Melting of Titanium Aluminides; Process Development and Material Properties Optimisation. PhD thesis, University of Sheffield.

L

Lambrou, Ioannis P (2017) Parent Material Surface Deposits Origin in Finish Turning Operations of the Powder Processed Nickel Based Superalloy RR1000. EngD thesis, University of Sheffield.

Lawal, Josephine (2017) Physical Vapour Deposition of Aluminium-Rich Nanostructured/Amorphous Metallic Coatings for Wear and Corrosion Protection. PhD thesis, University of Sheffield.

Leong, Zhao Yuan (2017) A new semi-empirical method based on a distorted tetragonal scheme for the structure prediction and alloy design of multiple-component alloys. PhD thesis, University of Sheffield.

Li, Linhao (2017) Oxide Ion Conduction in A-site Bi-containing Perovskite-type Ceramics. PhD thesis, University of Sheffield.

Liu, Chang (2017) Structure, Mechanical and Tribological Properties of Hydrogen-free Amorphous Carbon Films Deposited by Dual-Frequency Mode Pulsed-DC Magnetron Sputtering. PhD thesis, University of Sheffield.

Liu, Lian (2017) Development of novel nanocomposite PVD coatings to improve wear and corrosion resistance of magnesium alloys. PhD thesis, University of Sheffield.

Lu, Huanjun (2017) Complex Self-Assembly of Amphiphilic and Polyphilic Liquid Crystalline Compounds. PhD thesis, University of Sheffield.

M

MacArthur, Andrew (2017) Electrically Accelerated Leaching of Simulated Cementitious Wasteforms. PhD thesis, University of Sheffield.

Mackie, Alexander J (2017) Spark Plasma Sintering as a powder processing route for pre-alloyed Sm2(Co, Fe, Cu, Zr)17 permanent magnets. PhD thesis, University of Sheffield.

Manai, Navid (2017) SELECTIVE LASER MELTING OF SAM1651, AN IRON-BASED BULK METALLIC GLASS. PhD thesis, University of Sheffield.

Masters, Robert (2017) Novel techniques in the scanning electron microscope for characterising polymer-based photovoltaic materials. PhD thesis, University of Sheffield.

Moore, Ian (2017) Modelling (D022) Precipitate Nucleation, Growth and Coarsening in the Nickel-base Superalloy 625. PhD thesis, University of Sheffield.

N

Nicholls, Simon J (2017) High Permittivity Ceramics for Dielectrically Loaded Applications. PhD thesis, University of Sheffield.

O

Owen, Robert (2017) Tissue Engineering an In Vitro Model of Osteoporosis. PhD thesis, University of Sheffield.

P

Pan, Xin (2017) Development of Lean Maraging Steels for Ultra high Strength Applications. PhD thesis, University of Sheffield.

Pashneh-Tala, Samand (2017) The Development of a Tissue Engineered Vascular Graft using a Poly(glycerol sebacate) Methacrylate Scaffold. PhD thesis, University of Sheffield.

Paterson, Thomas (2017) PolyHIPE Microspheres for Injectable Bone Tissue Engineering Applications. PhD thesis, University of Sheffield.

Peel, Ross (2017) The Preparation and Application of Thorium-based Nuclear Fuels. PhD thesis, University of Sheffield.

Piao, Yongzhe (2017) Graphene-based Polymer Nanocomposite Hydrogels. PhD thesis, University of Sheffield.

S

Saldana-Garza, Edgar Ivan (2017) Mechanical Properties and Microstructure of Large Steel Forgings for Applications in the Energy Sector. PhD thesis, University of Sheffield.

Senior, Faye (2017) The Development of Aluminium Foams for Enhanced Heat Transfer. PhD thesis, University of Sheffield.

Stevenson, Warren (2017) Characterisation of Low Symmetry Liquid Crystal Structures. PhD thesis, University of Sheffield.

Su, Xing (2017) Polymer/Montmorillonite Nanocomposites: Polyamide 6 Nanocomposites and Polyacrylamide Nanocomposite hydrogels. PhD thesis, University of Sheffield.

Sun, Ming (2017) Improving Corrosion Protection of Magnesium Alloys by Plasma Electrolytic Oxidation Based Coatings. PhD thesis, University of Sheffield.

T

Taylor, Mark JD (2017) PROCESSING OF POROUS HIGH MELTING TEMPERATURE METALS USING A REMOVABLE SECOND PHASE. PhD thesis, University of Sheffield.

V

VIOLATOS, IOANNIS (2017) Fatigue Performance of Ti-6Al-4V Drilled Plates. PhD thesis, University of Sheffield.

W

Wan, Quan (2017) Scanning electron microscopy investigation of bio-polymer composites morphology. PhD thesis, University of Sheffield.

Weston, Nicholas (2017) A novel solid-state processing route to generate cost-effective titanium alloy components. PhD thesis, University of Sheffield.

Z

Zhao, Jiang (2017) The role of refractory metals in controlling properties of Nb-silicide based in-situ composites. PhD thesis, University of Sheffield.