Chikho, Abdul Hakim (1989) Frame behaviour with semi-rigid connections. PhD thesis, University of Sheffield.
Abstract
In this thesis both analytical and design studies have been conducted on the behaviour of fully and semi-rigidly connected multistorey steel frames. Many topics have been
addressed, current design approaches examined and new design
methods proposed to allow for such effects based upon a
first order linear elastic analysis, which is the most commonly used in normal design. These topics are as follows: 1) The well known
amplified sway method (see BS 5950: 1985: Part 1) which can
be used to incorporate the effect of the presence of axial loads on the behaviour of sway frames was studied. A modification to this method has been proposed and the validity of the proposed method was checked using an existing computer program [1] to verify the proposed method against a second order analysis. 2) The influence of the action of semi-rigid connections on
frame behaviour was examined and the need to conduct a systematic investigation into the problem verified. A
simple hand calculation method to incorporate this influence to any of the conventional design methods
has been proposed. A second computer program [2] was slightly modified to suit the university of Sheffield IBM3083 mainframe machine and this program was later
used in this study. 3) The stiffening effect due to partial sway bracing resulting from the presence of block
or brickwork walls in a practical multistorey
frame accompanied by the weakening effect due to the finite
stiffness of semi-rigid joints on frame serviceability was
investigated and a suitable design method is recommended.
4) The behaviour of columns in sway frames with and without partial sway bracing, resulting from the presence of
infill panels in practical frames, has been examined. Design charts which can be used to predict a reasonably conservative estimation of the inelastic ultimate load of a framed column in a sway structure are given. These
charts are particularly helpful in assisting a designer to make a reasonably good initial selection for the column section sizes in a flexibly connected frame. In
addition an empirical formula has been proposed to incorporate the beneficial effect on the column behaviour resulting from the presence of infill panels
in real steel frames. In order to conduct this study a computer program developed by Rifai [3] has been modified to simulate the behaviour of a flexibly connected sway subassemblages. 5) Finally general conclusions and recommendations for future work are given.
Metadata
Keywords: | Steel frames; Multistorey |
---|---|
Awarding institution: | University of Sheffield |
Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > Civil and Structural Engineering (Sheffield) |
Identification Number/EthosID: | uk.bl.ethos.388190 |
Depositing User: | EThOS Import Sheffield |
Date Deposited: | 22 Nov 2012 16:15 |
Last Modified: | 08 Aug 2013 08:50 |
Open Archives Initiative ID (OAI ID): | oai:etheses.whiterose.ac.uk:3067 |
You do not need to contact us to get a copy of this thesis. Please use the 'Download' link(s) above to get a copy.
You can contact us about this thesis. If you need to make a general enquiry, please see the Contact us page.