White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Ultimate limit state analysis of externally post-tensioned structures.

Heng, Johnny Wong Liang (1997) Ultimate limit state analysis of externally post-tensioned structures. PhD thesis, University of Sheffield.

[img] Text (266003.pdf)
266003.pdf

Download (20Mb)

Abstract

The UK Department of Transport (DoT) has recently encouraged the use of externally post-tensioned structures for bridge construction. This is due to the durability problems encountered with the conventional internally bonded post-tensioned structures. However, due to the lack of bond between the concrete and the external tendons, the ultimate strength of these structures cannot be determined by just performing a sectional analysis at the section of maximum moment. Although several recommendations have been made for the ultimate analysis of these structures, none were considered satisfactory here. Hence the purpose of this investigation is to study the flexural behaviour of these structures of all stages up to collapse, and to propose a practical methodology for estimating their ultimate strength. The study introduces eight non-linear analytical models developed for the prediction of the moment vs. deflection response of simply supported externally post-tensioned beams (with and without deviators located along their spans) up to ultimate. The models employ an iterative procedure that involves the application of loads to the structure in increments up to the collapse condition, where the curvature distribution predicted at each loading sequence is used to estimate the stress increase and variation in eccentricity in the external tendons. Second-order effects due to variation in eccentricity of external tendons and frictional behaviour of tendons at the deviators are both taken into account in these models. The eight models were then verified by comparing the results derived from them with reported experimental data, whereby good correlation was obtained. An extensive parametric study was subsequently conducted using the proposed models applied to the various parameters that influence the ultimate behaviour of externally prestressed structures Finally, the recommendations in the codes of practice for the ultimate design of these structures were also investigated here

Item Type: Thesis (PhD)
Keywords: Bridge construction
Academic Units: The University of Sheffield > Faculty of Engineering (Sheffield) > Civil and Structural Engineering (Sheffield)
Identification Number/EthosID: uk.bl.ethos.266003
Depositing User: EThOS Import Sheffield
Date Deposited: 09 Jan 2017 12:07
Last Modified: 09 Jan 2017 12:07
URI: http://etheses.whiterose.ac.uk/id/eprint/14442

You do not need to contact us to get a copy of this thesis. Please use the 'Download' link(s) above to get a copy.
You can contact us about this thesis. If you need to make a general enquiry, please see the Contact us page.

Actions (repository staff only: login required)