Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS
Group by: Thesis author | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 55.

A

ADEYEMI, GBENGA JOSHUA (2017) Development of an External Ultrasonic Sensor Technique to Measure Interface Conditions in Metal Rolling. PhD thesis, University of Sheffield.

Abdulqadir, Lawal Babatunde (2017) Investigation of the Effects of Soot on the Wear of Automotive Engine Components. PhD thesis, University of Sheffield.

Abere, Julius Oluwatayo (2017) Improved Performance of Bio-lubricant By Nanoparticles Additives. PhD thesis, University of Sheffield.

Abuan, Binoe (2017) The Performance and Hydrodynamics in Unsteady Flow of a Horizontal Axis Tidal Turbine. PhD thesis, University of Sheffield.

AlQayim, Khalidah (2017) Combustion Behaviour of Biomass in Air and Oxy-fuel Environments and Techno-economic Analysis of Biomass Energy with Carbon Capture. PhD thesis, University of Sheffield.

Ali, Haider (2017) Evolution of Residual Stress in Ti6Al4V components fabricated using Selective Laser Melting. PhD thesis, University of Sheffield.

Ali, Usman (2017) Process Simulation of Power Generation Systems with CO2 Capture. PhD thesis, University of Sheffield.

Asker, Haval (2017) Analysis and evaluation of multi-strand beams under static and dynamic loading. PhD thesis, University of Sheffield.

B

Bahari, Adli (2017) Investigation into Tribological Performance of Vegetable Oils as Biolubricants at Severe Contact Conditions. PhD thesis, University of Sheffield.

Boldock, Luke (2017) The Influence of Stent Geometry on Haemodynamics and Endothelialisation. PhD thesis, University of Sheffield.

Buckley, Christopher (2017) Upper body accelerations as a biomarker of gait impairment in the early stages of Parkinson's disease. PhD thesis, University of Sheffield.

Buckley-Johnstone, Luke (2017) Wheel/Rail Contact Tribology: Characterising Low Adhesion Mechanisms and Friction Management Products. PhD thesis, University of Sheffield.

C

Cartledge, Andrew (2017) The Fatigue of Carbon Fibre Composites Containing Interlaminar Inkjet Printed Polymer Droplets. PhD thesis, University of Sheffield.

Cox, Adam (2017) Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components. EngD thesis, University of Sheffield.

D

Dolcetti, Giulio (2017) Remote monitoring of shallow turbulent flows based on the Doppler spectra of airborne ultrasound. PhD thesis, University of Sheffield.

Dominguez Caballero, Javier Alejandro (2017) Live Tool Condition Monitoring of SiAlON Inserted Tools whilst Milling Nickel-Based Super Alloys. PhD thesis, University of Sheffield.

dos Santos Leite Ferreira, Ana Sofia (2017) Computational model of normal and cancer cell collective mechanics and migration. PhD thesis, University of Sheffield.

E

Ebieto, Celestine Ebieto (2017) Dynamics of Premixed Flames in Tube. PhD thesis, University of Sheffield.

F

Faik, Ahmad Muneer El-Deen (2017) Quantitative Investigation of the Multicomponent Fuel Droplet Combustion Using High Speed Imaging and Digital Image Processing. PhD thesis, University of Sheffield.

Fuentes, Ramon (2017) On Bayesian Networks for Structural Health and Condition Monitoring. PhD thesis, University of Sheffield.

G

Gadsby, Philip (2017) Surface Roughness Effects on Thermally Stressed Aviation Fuel. PhD thesis, University of Sheffield.

Giasin, Khaled (2017) Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy. PhD thesis, University of Sheffield.

Gibbons, Tom (2017) Structural Modification for Chatter Avoidance in High Speed Milling. EngD thesis, University of Sheffield.

Goonesekera, A K (2017) Performance Optimisation of Hot Water Cylinders. MPhil thesis, University of Sheffield.

H

Hayward, Michael John (2017) A Combined Experimental and Modelling Approach to the Characterisation of the Fluid Film in Dynamic Shape Roll Pads. PhD thesis, University of Sheffield.

K

KARAGIANNI, EIRINI (2017) EXPERIMENTAL ANALYSIS OF CO2-DILUTED GAS FLAMES FOR CARBON CAPTURE. PhD thesis, University of Sheffield.

Khan, Irfan Ullah (2017) Vibration Suppression in Flexible Structures using Hybrid Active and Semi-active Control. PhD thesis, University of Sheffield.

L

Lamberto, Giuliano (2017) An innovative approach to tibiofemoral joint modelling. PhD thesis, University of Sheffield.

M

Marcotti, Stefania (2017) Mechanical characterisation of bone cells and their glycocalyx. PhD thesis, University of Sheffield.

Marshall Cross, Daniel (2017) Enhancing the piston effect in underground railways. PhD thesis, University of Sheffield.

Melis, Alessandro (2017) Gaussian process emulators for 1D vascular models. PhD thesis, University of Sheffield.

Moers, B (2017) Development of a novel gene screening platform for cells exposed to flow. MPhil thesis, University of Sheffield.

Mohd Nasir, Siti Diana Nabilah (2017) The Influence of Building Configuration on the Urban heat Island Effect. PhD thesis, University of Sheffield.

Motazedi, Niloufar (2017) The development of solvers for Symbolic Computational Dynamics. PhD thesis, University of Sheffield.

Mura, Gabriele Luigi (2017) Mesh Sensitivity Investigation in the Discrete Adjoint Framework. PhD thesis, University of Sheffield.

N

Ng, Woon Choon (2017) Experimental Study of Microbubbles Behaviour in Airlift Bioreactor (ALB). MPhil thesis, University of Sheffield.

Nioi, Manuel (2017) Surface defect evolution analysis in high silicon steels during hot rolling processes: experimental and numerical simulation. PhD thesis, University of Sheffield.

Nyong, Oku (2017) Development of a Rapid Compression Machine for Screening Alternative Fuel for Gas Turbines. PhD thesis, University of Sheffield.

O

Orogbemi, Olutomisin Manase (2017) Gas Permeability of Gas Diffusion Media Used in Polymer Electrolyte Fuel Cells. PhD thesis, University of Sheffield.

P

Pistis, Mauro (2017) The influence of catheter design on Urodynamics and their potential role on biofilm formation. MPhil thesis, University of Sheffield.

R

Ravikumar, Nishant (2017) A Probabilistic Framework for Statistical Shape Models and Atlas Construction: Application to Neuroimaging. PhD thesis, University of Sheffield.

S

Saeed, Hussain (2017) Studies of the Physical Aspects of Intumescence Using Advanced Diagnostic Methods. PhD thesis, University of Sheffield.

Sanusi, Shahmir H (2017) THE ROLE OF THERMAL INPUT ON SQUAT TYPE DEFECTS IN RAILS. PhD thesis, University of Sheffield.

Sheikhansari, Abdolkarim (2017) Evaluation of Solid Oxide Fuel Cells Operating on Hydrogen Sulfide Contaminated Fuel. PhD thesis, University of Sheffield.

Sofotasiou, Polytimi (2017) Aerodynamic optimisation of sports stadiums towards wind comfort. PhD thesis, University of Sheffield.

T

Tafazzolimoghaddam, Behrooz (2017) Computational Mechanics of Fracture and Fatigue in Composite Laminates by Means of XFEM and CZM. PhD thesis, University of Sheffield.

Tasron, Diyana Nurfathiah (2017) Understanding the tribological interactions between plantar skin and sock textiles through the development of biofidelic test-beds. PhD thesis, University of Sheffield.

Tronci, Giuseppe (2017) Frictional Behaviour of Coated Self-locking Aerospace Fasteners. PhD thesis, University of Sheffield.

U

Ura Hernandez, Daniel (2017) DEVELOPMENT OF A TEST DEVICE TO MEASURE THE TRIBOLOGICAL BEHAVIOUR OF SHOE-SURFACE INTERACTIONS IN TENNIS. PhD thesis, University of Sheffield.

W

Watson, Michael (2017) Modifications to blade tips in abradable contacts. PhD thesis, University of Sheffield.

Wittkowske, Claudia (2017) The role of mechanical forces in bone formation: Evaluation of long-term responses by osteoblasts to low fluid shear stress in vitro. PhD thesis, University of Sheffield.

Y

Yang, Xin (2017) Development of Ash Deposition Prediction Models through the CFD Methods and the Ash Deposition Indice. PhD thesis, University of Sheffield.

Z

Zaheer, Asim (2017) Designing a Task Assessment Tool for Ease and Risk within the Domestic Environment. PhD thesis, University of Sheffield.

Zavala Arredondo, Miguel Angel (2017) Diode Area Melting Use of High Power Diode Lasers in Additive Manufacturing of Metallic Components. PhD thesis, University of Sheffield.

Zincone, Eva (2017) Generation of laminar streaks in a Rankine-body boundary layer by free-stream vortical disturbances. PhD thesis, University of Sheffield.

This list was generated on Fri Dec 9 01:13:40 2022 GMT.