Browse by University and Academic Department

Al-Anii, Yaser Talal Saber (2017) Holistic and Energy-Efficient Management of Datacentres. PhD thesis, University of Leeds.

Barber, Andrew Robert (2017) Development and Optimisation of 3D Printed Compliant Joint Mechanisms for Hypermobile Robots. PhD thesis, University of Leeds.

Barco, Andres (2017) Self-Assembling Peptides for Cartilage Regeneration. PhD thesis, University of Leeds.

Beadling, Andrew Robert (2017) Biotribocorrosion of Hard-on-Hard Bearing Surfaces in Orthopaedic Hip Replacements. PhD thesis, University of Leeds.

Burkle, Daniel Phillip (2017) Understanding the Formation of Protective FeCO3 on to Carbon Steel Pipelines during CO2 Corrosion. PhD thesis, University of Leeds.

Carley, Sean Michael (2017) Diamond-like Carbon Coatings for Improved Mechanical Performance of Polymer Materials. PhD thesis, University of Leeds.

Fazeli, Arman (2017) Design and modelling of an efficient assistive robotic exoskeleton with optimum active and passive degrees of freedom. PhD thesis, University of Leeds.

Husman, Muhammad Afif Bin (2017) A Haptic Feedback System for Lower Limb Amputees Based on Gait Event Detection. PhD thesis, University of Leeds.

Norton, Joseph Christopher (2017) The Design and Development of a Mobile Colonoscopy Robot. PhD thesis, University of Leeds.

Oladokun, Abimbola Oluwawemimo (2017) Mechanism of fretting corrosion at the modular taper interface of hip prosthesis. PhD thesis, University of Leeds.

O’Dwyer Lancaster‐Jones, Oscar Gilbert (2017) The Effect of Variations in Component Positioning and Swing Phase Load on the Occurrence and Severity of Edge Loading and Wear in Hip Joint Replacements. PhD thesis, University of Leeds.

Sitepu, Muhammad Haikal (2017) The Formulation of Sustainable Replanting Policies in the Indonesian Rubber Industry Supply Network. PhD thesis, University of Leeds.

Soltanahmadi, Siavash (2017) Tribochemical investigation of micropitting in rolling-element bearing applications: the influence of lubricant additives and water contamination. PhD thesis, University of Leeds.

Tatchell-Evans, Morgan Rhys (2017) Energy Efficient Operation of Data Centres – Technical, Computational and Political Challenges. PhD thesis, University of Leeds.

Tsagkaraki, Eirini (2017) Experimental and Computational simulation of strain in medium sized arteries at macro- and micro-level. PhD thesis, University of Leeds.

Vazirian, Mohammad Mohsen (2017) Surface Engineering Solutions for Scale Resistance. PhD thesis, University of Leeds.