Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS
Group by: Thesis author | Item Type | No Grouping
Jump to: A | B | E | F | H | J | K | M | O | P | R | S | Y
Number of items: 22.

A

Adamu, Mohammed Alhaji (2018) Development of Solid Electrolyte and Reference Materials for Designing Sensor for Measuring Magnesium in Non-Ferrous Alloys. PhD thesis, University of Leeds.

Al-Azez, Zaineb Talib Saeed (2018) Optimised Green IoT Network Architectures. PhD thesis, University of Leeds.

Al-Hadeethi, Basheer Khalil Ibraheem (2018) Numerical Modelling of Erosion and Deposition with Cohesive and Non-Cohesive Sediments. PhD thesis, University of Leeds.

Alghamdi, Ayman Ahmad O. (2018) A Computational Lexicon and Representational Model for Arabic Multiword Expressions. PhD thesis, University of Leeds.

Ananaba, Martina Onyeche (2018) Physical Modelling of Thermal Load on an Energy Pile. PhD thesis, University of Leeds.

B

Bin Ramli, Ahmad Kamal (2018) Service Level Agreement-based adaptation management for Internet Service Provider (ISP) using Fuzzy Q-learning. PhD thesis, University of Leeds.

E

Elmahroug, Mohamed Hamza M (2018) Facilitating effective external stakeholder involvement in the pre-design phase of civil engineering infrastructure projects. PhD thesis, University of Leeds.

F

Fry, Nicholas Richard (2018) A Robotic Multiaxis Additive Manufacturing System for Nonplanar and Dynamic Orientation Printing. PhD thesis, University of Leeds.

H

Hoft, Richard Paul (2018) Noise Modeling and Characterization of Nonlinear RF/Microwave Components. PhD thesis, University of Leeds.

Huang, Han (2018) Analysis and Control of Modular Multilevel Cascaded Converter-Based Flexible AC Transmission Systems. PhD thesis, University of Leeds.

Huynh, Hung Ngoc (2018) Radiation Simulation for Air and Oxy-fuel Combustion using Computational Fluid Dynamics. PhD thesis, University of Leeds.

J

Jahanger, Zuhair Kadhim (2018) Micromechanical Investigations of Foundation Structures-Granular Soil Interactions. PhD thesis, University of Leeds.

Johnson, Michael Charles (2018) Gas retention and release from nuclear legacy waste. PhD thesis, University of Leeds.

K

Kadhim, Mustafa Alaa Kadhim (2018) Holistic Study of Thermal Management in Direct Liquid Cooled Data Centres: from the Chip to the Environment. PhD thesis, University of Leeds.

M

Mulla, Mohmed Ashraf (2018) High Volume Fraction Polymer Nanoparticles as Inkjet Ink Model Suspensions: from Synthesis to Rheological and Printing Characterisation. PhD thesis, University of Leeds.

O

Offeh Gyimah, Kwabena (2018) An Investigation on the Chemical and Microwave-assisted Approaches for the Reclamation of Metallic values from Computer Printed Circuit Boards (PCB) Wastes. PhD thesis, University of Leeds.

Onyeji, Lawrence Ibe (2018) Corrosion Behaviour of Proprietary Micro-alloyed Steels. PhD thesis, University of Leeds.

P

Parish, James Stephen (2018) The Design and Implementation of Continuous Frequency and Bandwidth Tunable Combline Cavity Filters. PhD thesis, University of Leeds.

R

Ramadhan, Abdulmajeed A. (2018) Electrohydrodynamic Driven Airflows for Microelectronics Thermal Management. PhD thesis, University of Leeds.

Roberts, Lee James (2018) Additives to Mitigate against Slagging and Fouling in Biomass Combustion. Integrated PhD and Master thesis, University of Leeds.

S

Shehzad, Muhammad Kashif (2018) Influence of vertical steel reinforcement on the behaviour of edge restrained reinforced concrete walls. PhD thesis, University of Leeds.

Y

Yu, Yisheng (2018) Drop-tube investigation of anomalous eutectic formation in undercooled melts. PhD thesis, University of Leeds.

This list was generated on Thu Sep 23 04:14:49 2021 BST.