Albariqi, Ibrahim (2026) High-Speed Spray-Deposited Perovskite Solar Cells: Process Optimisation and Annealing Simplification. PhD thesis, University of Sheffield.
Abstract
Abstract
Although various methods have been used to fabricate perovskite solar cells, not all are suitable for large area and industrial production while maintaining high film quality. Therefore, this research aimed to develop and optimise methylammonium-free CsFAPbI3 perovskite solar cells fabricated by high-speed spray coating at 250 mm s−1. The work also aimed to simplify the fabrication process by spray coating the electron transport layer, perovskite absorber and hole transport layer without using additional passivation layers. The first part of this thesis focuses on optimisation of the high speed spray coating process. Spray coating was selected because of its compatibility with continuous manufacturing and high-throughput production. However,
film formation is affected by many processing parameters. For this reason, JMP Design of
Experiments (DOE) was used to investigate the main variables and their interactions while
reducing the number of experimental trials. This approach identified the most important
parameters controlling film thickness, morphology, coverage and device performance, and was followed by focused optimisation to obtain reproducible deposition conditions. The second part of the work investigates aerosol vapour treatment (AVT) as a post-deposition process to reduce the dependence on conventional high-temperature annealing. Different combinations of low- temperature annealing and AVT were studied to control solvent removal, crystallisation and grain growth. The best performance was obtained when a mild 70 °C annealing step was followed by AVT, replacing the second 150 °C annealing step. This process produced a champion power conversion efficiency of 18.09%. Overall, this work demonstrates that high- speed spray coating combined with statistical optimisation and controlled aerosol treatment can provide a simpler and more scalable route for producing high-performance perovskite solar cells. These methods support faster processing, reduced thermal demand and improved compatibility with continuous manufacturing. The approach also reduces unnecessary processing steps and provides a practical pathway towards large-area photovoltaic manufacturing.
Metadata
| Supervisors: | David, Lidzey |
|---|---|
| Awarding institution: | University of Sheffield |
| Academic Units: | The University of Sheffield > Faculty of Science (Sheffield) The University of Sheffield > Faculty of Science (Sheffield) > Physics and Astronomy (Sheffield) |
| Date Deposited: | 07 Oct 2026 09:04 |
| Last Modified: | 07 Oct 2026 09:04 |
| Open Archives Initiative ID (OAI ID): | oai:etheses.whiterose.ac.uk:39539 |
Download
Final eThesis - complete (pdf)
Embargoed until: 6 October 2027
Please use the button below to request a copy.
Filename: IbrahimAlbariqi-2026-Thesis corrections.pdf
Export
Statistics
Please use the 'Request a copy' link(s) in the 'Downloads' section above to request this thesis. This will be sent directly to someone who may authorise access.
You can contact us about this thesis. If you need to make a general enquiry, please see the Contact us page.