Singleton, Mark Fraser (1986) Advances in the theory and practice of hard chromium plating. PhD thesis, University of Sheffield.
Abstract
A consideration of pertinent aspects of general electro- chemistry and electrodeposition was followed by a review of the relevant literature relating to hard chromium plating technique and understanding (and problems and proposed improvements therein). Following the establishment and evaluation (using a Standard
Solution at 55 0 C) of a reproducible
technique for the measurement of (low current density) partial cathodic polarization data during plating,
the Tafel regions of the resulting curves were analysed
using the relationship - dn Cp -2.303 kT to provide an
indication as to the nature of the rate-determining
step in the plating and hydrogen evolution (cathodic)
reactions. Information thus generated was used with a modified Arrhenius- type expression and
further (experimentally determined) data to provide values of the thermodynamic constants of activation
for the plating reaction. A series of experiments were undertaken to determine the effects upon various
(physical) plate and plating parameters of three new
inorganic additions (at selected concentrations) to a
Standard Solution at 55 0 C. The results of these tests were commented upon with regard to potential
industrial applications. The electrochemical investigative techniques referred to earlier were then employed with each new solution tested to determine the effect (if any) of the new additions upon those aspects of the
deposition mechanism yielded, and to relate these effects
to the observed (corresponding) changes in plate and plating parameters. The new additions were found to have profound effects upon a number of (physical) plate and plating parameters, and upon experimentally
determined theoretical aspects of the deposition mechanism (the relationship between the two is discussed). Whilst no definite conclusion has been reached with regard to the precise mechanism of chromium plating, the techniques employed and the data generated have been used to provide significant pointers with regard to the direction future investigations might take.
Metadata
Keywords: | Metallurgy & metallography |
---|---|
Awarding institution: | University of Sheffield |
Academic unit: | Department of Metallurgy |
Identification Number/EthosID: | uk.bl.ethos.297331 |
Depositing User: | EThOS Import Sheffield |
Date Deposited: | 20 Nov 2012 10:06 |
Last Modified: | 08 Aug 2013 08:50 |
Open Archives Initiative ID (OAI ID): | oai:etheses.whiterose.ac.uk:3053 |
You do not need to contact us to get a copy of this thesis. Please use the 'Download' link(s) above to get a copy.
You can contact us about this thesis. If you need to make a general enquiry, please see the Contact us page.