Ghazal, Omar M S (2016) Low Reflectivity Facet Realization in GaAs-Based Optoelectronic Devices Using Self-Aligned Stripe Process. PhD thesis, University of Sheffield.
Abstract
This thesis explores the realization of low facet reflectivity using self-aligned stripe buried waveguide configuration and its implementation in optoelectronic devices such as superluminescent diodes (SLDs) and semiconductor optical amplifiers (SOAs).
I explored the development of the buried waveguide in AlGaAs/GaAs material system ,since its first presentation in 1974 by Tsukada, in order to identify the problems associated with this technology.
A novel window-faceted structure is demonstrated. The experimental measurements demonstrated effective reflectivity <10-14 as a result of both divergence and absorption within these window-like regions (i.e. not transparent). Its implementation to suppress lasing in tilted and normal-to-facet waveguide SLDs was thoroughly investigated in chapters 3 and 4. In the tilted devices, ~40mW output power with spectral modulation depth < 2% is demonstrated. In the latter types of SLDs, up to 16mW output power with <5% spectral modulation depth was recorded, which is the highest power demonstrated for such configurations. The performance of the two types of devices was measured without the application of anti-reflective coatings on the rear facet, which makes them inherently broadband.
By incorporating a windowed facet at each end of a waveguide I could realize an SOA with window structured facet. Promising results were demonstrated in this configuration including 33dB gain and <6dB noise figure, which are comparable to the state-of-the-art.
A trial was held to extend the concept of absorptive rear window to visible wavelengths available in the GaInP/AlGaInP material system. Problems associated with such devices were explored briefly and two solutions are suggested. Simulations were performed to realize design of an optimized device. Unfortunately, the experimental implementation of the design was not successful but suggestions for strategies to overcome these problems are discussed
Metadata
Supervisors: | Groom, Kristian M. and Hogg, Richard |
---|---|
Awarding institution: | University of Sheffield |
Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > Electronic and Electrical Engineering (Sheffield) |
Identification Number/EthosID: | uk.bl.ethos.687236 |
Depositing User: | Mr Omar M S Ghazal |
Date Deposited: | 21 Jun 2016 14:54 |
Last Modified: | 03 Oct 2016 13:12 |
Open Archives Initiative ID (OAI ID): | oai:etheses.whiterose.ac.uk:13316 |
Download
Omar Ghazal Thesis
Filename: Omar Ghazal Thesis.pdf
Licence:
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 2.5 License
Export
Statistics
You do not need to contact us to get a copy of this thesis. Please use the 'Download' link(s) above to get a copy.
You can contact us about this thesis. If you need to make a general enquiry, please see the Contact us page.