Bensalem, Rafik (1991) Wind driven natural ventilation in courtyard and atrium-type buildings. PhD thesis, University of Sheffield.
This study investigated the effectiveness of wind-driven natural ventilation in courtyard and atrium-type buildings, particularly in the context of ventilative cooling. Courtyard and atrium buildings are currently enjoying great popularity. Perhaps a primary reason for their revival comes from the energy and environmental awareness of the current period, in which courtyard and atrium concepts are emerging as very promising. Wind-driven ventilation is one of the most basic and probably among the most efficient ways to prevent overheating, and provide cooling in the summer season, especially in humid climates. A review of previous works showed that little attention has been given to the wind-driven natural ventilation capability of these structures, and to the means of maximizing this ventilation. This study was thus aimed to fill part of the gap in this subject. In order to evaluate the wind-driven ventilation effectiveness of these structures, and to examine some of the influential parameters, experimental wind tunnel tests were made. Actual indoor air flows were measured in small replica models of four-storey courtyard and atrium buildings by means of small calibrated orifice plates. A parametric study of the geometry of the courtyard was made in isolation conditions, where the depth and breadth of the courtyard were systematically varied. Several atrium ventilation modes were tested both in isolation and in urban terrains. The tests involved different roof geometries and various roof porosities. The measurements were followed by a discussion on the validity of simple computational methods to predict airflow in atria. The investigation portrayed the importance of some factors, such as the wind orientation rather than the courtyard geometry, for enhancing the flow in these structures. The superiority of some atrium designs over the courtyard types, particularly in sheltered sites, was underlined. The study concluded with a discussion of design guide-lines and referred the reader to an application as an example, describing a simple step-by-step method to estimate the cooling benefits of these structures in a particular site, and making use of the measurement data obtained from the study.
|Item Type:||Thesis (PhD)|
|Keywords:||Air conditioning & heating & ventilation|
|Academic Units:||The University of Sheffield > Faculty of Social Sciences (Sheffield) > School of Architecture (Sheffield)|
|Depositing User:||EThOS Import Sheffield|
|Date Deposited:||07 Dec 2012 13:39|
|Last Modified:||08 Aug 2013 08:50|