Browse by University and Academic Department

A

AL-Bedhany, Jasim Hasan Ilik (2020) Effect of Compression, Impact and Slipping on Rolling Contact Fatigue and Subsurface Microstructural Damage. PhD thesis, University of Sheffield.

ALMOHAMMADI, BANDAR AWADH A (2020) Investigating the Effects of Alternative Fuels with Different Aromatic Species on Compression Ignition Engine Emissions and Performance. PhD thesis, University of Sheffield.

Ai, Sheng (2020) ANALYSIS OF MATERIAL DEFORMATION AND FRACTURE MECHANISM IN INCREMENTAL SHEET FORMING BY SIMPLIFIED TESTING METHODS. PhD thesis, University of Sheffield.

Al-juboory, Ameer ORCID: https://orcid.org/0000-0002-5859-0221 (2020) Use of the sub-structuring method in the analysis of vibrating structures with layered damping technologies. PhD thesis, University of Sheffield.

Aliyu, Abdul'Aziz Adamu (2020) Post-combustion Carbon Capture for Combined Cycle Gas Turbines. PhD thesis, University of Sheffield.

Amaludin, Nazrein Adrian bin ORCID: https://orcid.org/0000-0001-5510-3021 (2020) Flame Instabilities in Open Ended Tubes. PhD thesis, University of Sheffield.

Ashworth, S (2020) Edge milled carbon fibre reinforced polymers: surface metrics and mechanical performance. PhD thesis, University of Sheffield.

Auzani, Ahmad Syihan (2020) Experimental and Kinetic Modelling Study of Jet A-1/Ethanol Blend Combustion and Oxidation Stability. PhD thesis, University of Sheffield.

Awadh, Sawsan (2020) Scale Adaptive Simulation of Turbulent Swirling Flow in Cyclones. PhD thesis, University of Sheffield.

B

Brown, Matthew (2020) Machining-induced white layers: Quantitative characterisation and non-destructive detection. EngD thesis, University of Sheffield.

C

Celikag, Huseyin (2020) On the dynamics of robotic machining. PhD thesis, University of Sheffield.

E

Ebaye Bejor, Scholastica (2020) EFFECT OF PARTICLE SIZE DISTRIBUTION ON KINETICS AND OVERALL DEGRADATION IN ANAEROBIC DIGESTION OF WASTE BIOMASS. PhD thesis, University of Sheffield.

Elsakka, Mohamed (2020) The Aerodynamics of Fixed and Variable Pitch Vertical Axis Wind Turbines. PhD thesis, University of Sheffield.

F

Falconer, Sarah (2020) Modelling, Materials and Methods Investigating Needle Insertion in Biomechanics. PhD thesis, University of Sheffield.

G

Gheit, Abdulaziz (2020) PRESSURE DROP AND FORCED CONVECTIVE HEAT TRANSFER IN HETEROGENEOUS POROUS MEDIA. PhD thesis, University of Sheffield.

H

Herrera, Paulo (2020) Effect of Cryogenic Treatment on the Abrasive Wear Resistance of Engineering Alloys. PhD thesis, University of Sheffield.

Hilton, Nikki (2020) Experimental Aspects of Deep Hole Drilling of Steel. PhD thesis, University of Sheffield.

Hu, Yanchen (2020) Investigation of the flow with air-core in hydrocyclones. PhD thesis, University of Sheffield.

Huerta Lucio, Karla Elisa ORCID: https://orcid.org/0000-0002-3486-9121 (2020) Investigation into the need for Additive Manufacturing personalisation of handheld assistive devices. PhD thesis, University of Sheffield.

Hurrell, Alistair (2020) Acoustical properties of polymeric fibres and their characterisation. PhD thesis, University of Sheffield.

J

Jeavons, Ian (2020) Improved Industrial Robot Positional Accuracy for Machining with Bias Correction. EngD thesis, University of Sheffield.

L

LI, ZHAOHUA (2020) An Analytical Wrinkling Prediction Method For Conventional Spinning. PhD thesis, University of Sheffield.

Li, Yonghong (2020) Gust Load Alleviation by Fluidic Actuators on a Blended-Wing-Body Configuration. PhD thesis, University of Sheffield.

Lizama Camara, Yahir Abraham (2020) NUMERICAL AND EXPERIMENTAL FATIGUE ANALYSIS OF SHORT GLASS FIBRE REINFORCED POLYMERS. PhD thesis, University of Sheffield.

M

MOHD NOR, NUR FATHIAH (2020) Investigation of the Effects of Soot on Friction and Wear Characteristics of Polymers (Elastomers and Thermoplastics) Engine Components. PhD thesis, University of Sheffield.

Martin, Alan ORCID: https://orcid.org/0000-0003-2935-1667 (2020) Investigating fundamental processes in erosive wear of titanium alloys by water droplets. PhD thesis, University of Sheffield.

Martinez, Ian (2020) A Machine Learning approach for damage detection and localisation in Wind Turbine Gearbox Bearings. PhD thesis, University of Sheffield.

O

Olivucci, Paolo ORCID: https://orcid.org/0000-0001-7570-1301 (2020) Numerical study of drag reduction through rotating actuators in a wall-bounded turbulent flow. PhD thesis, University of Sheffield.

Omehia, Kelachi ORCID: https://orcid.org/0000-0001-9154-4174 (2020) Gas Turbine CO2 Enhancements on Carbon Capture and Storage. PhD thesis, University of Sheffield.

P

Pironti, Gianluca (2020) Drag reduction in a turbulent channel with bars via a spanwise oscillating pressure gradient. PhD thesis, University of Sheffield.

Pratt, Thomas (2020) Constrained Aerodynamic Adjoint Optimisation of Supersonic Manoeuvre Wings. PhD thesis, University of Sheffield.

Pulfrey, William (2020) A study of the influence of lubricant viscosity on the operation and efficiency of a Continuously Variable Valve Lift hydraulic valvetrain system. PhD thesis, University of Sheffield.

Pupo Roncallo, Oscar Rafael ORCID: https://orcid.org/0000-0002-0514-5351 (2020) Large-scale integration of renewable energy sources in the future energy system of Colombia. PhD thesis, University of Sheffield.

R

Rajendran, S (2020) Applications of Recycled Plastics and Life Cycle Assessment. PhD thesis, University of Sheffield.

S

Salako, Idayat (2020) GPU Implementation of extended total Lagrangian explicit (gpuXTLED) for Surgical Incision Application. MPhil thesis, University of Sheffield.

Stewart, Colin (2020) Online Defect Detection for Automated Tape Layup Composite Manufacturing Processes. MPhil thesis, University of Sheffield.

T

Theaker, Helen ORCID: https://orcid.org/0000-0001-6087-8905 (2020) Can micro-scale anaerobic digestion be viable? An investigation of the techno-economics and flexibility of micro-scale anaerobic digestion for future routes to the market. PhD thesis, University of Sheffield.

Tyreas, Georgios ORCID: https://orcid.org/0000-0003-4768-3307 (2020) Measuring lubricant viscosity at a surface and in a bearing film using shear-horizontal surface acoustic waves. PhD thesis, University of Sheffield.

Tóth, Máté (2020) On the dynamic stability of surface grinding: the role of the specific energy in regenerative chatter. PhD thesis, University of Sheffield.

U

Urena, Luis (2020) ON THE STABILITY OF VARIABLE HELIX MILLING TOOLS. PhD thesis, University of Sheffield.

W

Waine, Louisa (2020) Network design for low energy cure. PhD thesis, University of Sheffield.

Wijesinghe, Charith J. ORCID: https://orcid.org/0000-0002-1954-2411 (2020) Impact of alternative fuels on atomisation, noise, vibration and combustion instabilities of gas turbines. PhD thesis, University of Sheffield.

Y

Yelland, Thomas Sam (2020) Cleaner Coal Combustion Technologies – The Impact on NOx Emissions and Fireside Corrosion. EngD thesis, University of Sheffield.

Yu, Feng (2020) Investigation of failure mechanisms of resistance spot welds in automotive steels using various techniques. PhD thesis, University of Sheffield.

Z

Zhang, Boxiu (2020) Investigating Material Removal Mechanisms in Aero-engine Turbine Fin Seals. PhD thesis, University of Sheffield.

Zhou, Hangxu (2020) Interaction of big particles with flow- A study of the spotting distances of the firebrands by modelling and simulations. PhD thesis, University of Sheffield.