The properties and performance of high strength silica fume concrete

Silicafume (SF) has been used as a partial replacement for cement in concrete and experiments have been carried out to measure the durability of the mixes. The SF mixes were made with 20% SF replacement of cement and waterlcement (wlc) ratios of 0.3 and 0.46. Three different curing conditions were used to simulate different site conditions and tests were carried out at 3,28 and 90 days after casting. The following properties were measuredfor the two SF mixes and the two control (OPC) mixes for each of the ages and curing conditions: corrosion rate of embedded steel by linear
polarisation, electrical resistivity, carbonation depth, water vapour permeability, chloride permeability, oxygen permeability and porosity from helium and mercury intrusion. Samples were also investigated by thermogravimetric analysis.

The resulting data matrix was analysed by using the method of analysis of variance to quantify the effect of the SF on the properties tested and their sensitivity to age and
curing. It was also analysed by multiple regression to identify major effects of one property on another.

It was concluded that SF will reduce the corrosion rate and that the major contributing factor is the substantial increase in resistivity that the SF causes. This increase in
resistivity was found to be highly sensitive to cold curing in the short term but this effect was not permanent. The cause of the increase in resistivity is believed to be the
depletion of calcium hydroxide which is caused by the pozzolanic activity of the SF. The analysis also indicated that the SF reduces the porosity in the .01-.15)1m size
range and that this has a major influence on the durability.