Motorway Vehicular Networks with Renewable Energy Powered Access Points

The goal of this work is to consider the potential of using renewable energy only to power roadside units (RSUs), which not only reduces CO2 footprint but also reduces the infrastructure needed in motorway vehicular communication. The thesis begins with collation and analysis of wind and motorway traffic data for the purpose of determining the energy demand of vehicular networks as well as the energy supply obtainable from wind. This is followed by the study of a standalone RSU powered by wind energy. Small size standalone wind energy systems which have benefits of low cost, easy and large scale deployments are implemented for the low power RSUs. The concept of wind energy based rate adaptation is introduced and implemented in the RSU through which RSU can vary transmission power according to the availability of wind energy. This reduces the outage and improves the overall service quality. Traditionally rate adaptation was employed to cater for wireless channel unavailability. A queuing model for the RSU is developed and verified through simulation to evaluate the performance in terms of delay, packet loss and utilisation. Channel fading is considered and the performance of the RSU is re-evaluated in terms of the same quality of service parameters, viz. delay, packet loss and utilisation to investigate the impact of fading in the network.
Next, the reliability of the RSU is redefined in the context of unavailability of sufficient wind power. The transient nature of wind energy causes the RSUs to either transmit at full data rate or not transmit at all depending on the availability of sufficient energy. Thus, a failure occurs when the wind power is less than the load. Therefore, a framework has been developed for redefining a number of reliability parameters in the context of wind powered RSUs. A detailed wind data analysis was carried out based upon the hourly wind speed obtained from the UK air information resource (AIR) database for a period of five years, to determine the energy model of the deployed micro-turbine. An energy storage device (a small battery) is connected to the micro-wind turbine for improved service quality.