A Study on Three Dimensional Spatial Scattering Modulation Systems

With an explosive growth of data traffic demand, the researchers of the mobile communication era forecast that the traffic volume will have a 1000x increase in the forthcoming beyond fifth generation (B5G) network. To satisfy the growing traffic demand, the three-dimensional (3-D) multiple-input-and-multiple-output (MIMO) system is considered as a key technology to enhance spectrum efficiency (SE), which explores degrees of freedom in both the vertical and the horizontal dimensions. Combined with 3-D MIMO technology, index modulation (IM) is proposed to improve both energy efficiency (EE) and SE in the B5G era. Existing IM technologies can be categorized according to the domain in which the additional IM bits are modulated, e.g., the spatial-domain IM, the frequency-domain IM and the beamspace-domain IM etc. As one of the mainstream IM techniques, spatial scattering modulation (SSM) is proposed, which works in the beamspace-domain. For SSM systems, the information bits are denoted by the distinguishable signal scattering paths and the modulated symbols. Therein, two information bit streams are transmitted simultaneously by selections of modulated symbols and scattering paths. However, the existing papers only discuss two-dimensional (2-D) SSM systems. The 2-D SSM system applies linear antenna arrays, which only take the azimuth angles to recognise the direction of scattering paths. Therefore, to take the full advantage of the beamspace-domain resources, this thesis mainly focuses on the 3-D SSM system design and the performance evaluation. Firstly, a novel 3-D SSM system is designed. For the 3-D SSM system, besides the azimuth angles of arrival (AoA) and angles of departure (AoD), the elevation AoA and AoD are considered. Then the optimum detection algorithm is obtained, and the closed-form union upper bound expression on average bit error probability (ABEP) is derived. Moreover, the system performance is evaluated under a typical indoor environment. Numerical results indicate that the novel 3-D SSM system outperforms the conventional 2-D SSM system, which reduces the ABEP by 10 times with the same signal-to-noise ratio (SNR) level under the typical indoor environment. Secondly, for the system equipped with large-scale antenna arrays, hybrid beamforming schemes with several RF-chains have attracted more attention. To further explore the throughput of the 3-D SSM system, a generalised 3-D SSM system is proposed, which generates several RF-chains in a transmission time slot to convey modulated symbols. A system model of generalised 3-D SSM is proposed at first. Then an optimum detection algorithm is designed. Meanwhile, a closed-form expression of the ABEP is also derived and validated by Monte-Carlo simulation. For the performance evaluation, three stochastic propagation environments with randomly distributed scatterers are adopted. The results reveal that the generalised 3-D SSM system has better ABEP performance compared with the system with a single RF-chain. Considering different propagation environments, the SSM system has better ABEP performance under the statical propagation environments than the stochastic propagation environments. Thirdly, to reduce the hardware and computational complexities, two optimisation schemes are proposed for the generalised 3-D SSM systems. The 2-D fast Fourier transform (FFT) based transceivers are designed to improve the hardware friendliness, which replace the analogue phase shift networks by the multi-bit phase shifter networks. To reduce the computational complexity of the optimum detection algorithm, a low-complexity detection scheme is designed based on the linear minimum mean square error (MMSE) algorithm. Meanwhile, to quickly evaluate, the asymptotic ABEP performance and the diversity gain of the generalised 3-D SSM system are obtained.