Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS
Group by: Thesis author | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | M | O | P | R | S | T | W | Y | Z
Number of items: 33.

A

Alharbi, Khaled (2015) Damage Investigation in Dual-Phase 1000 Steel and Behaviour Prediction Using Microstructure Based Modelling. PhD thesis, University of Sheffield.

Alhinai, Almajd (2015) An investigation of classifying the flow over rough surfaces into k- and d- type in turbulent channel flow. PhD thesis, University of Sheffield.

Amel, Hoda (2015) Investigating the Cyclic Performance of Laser Sintered Nylon 12. PhD thesis, University of Sheffield.

Anthistle, Thomas (2015) Modelling the Effects of Blast Loads in Rail Vehicles. PhD thesis, University of Sheffield.

B

Beaty, P (2015) Experimental Testing Procedures to Investigate and Improve Insulated Rail Joint Design and Life Cycle. PhD thesis, University of Sheffield.

Braun, Martin (2015) The Effects of Location and Climate Change on the Energy Consumption of Supermarkets in the UK. PhD thesis, University of Sheffield.

Brunelli, Marzia (2015) A mechanobiology study on the response to mechanical compression of mesenchymal progenitor cells cultured in a composite scaffold made of 3D Insert PCL and collagen gel. PhD thesis, University of Sheffield.

C

Chen, Wenqu (2015) Direct Load Monitoring in Rolling Element Bearing by Using Ultrasonic Time of Flight. PhD thesis, University of Sheffield.

D

Duan, Yu (2015) Study of cross flows and large flow structures in nuclear reactors. PhD thesis, University of Sheffield.

E

EFTHYMIADIS, PANOS (2015) Multiscale experimentation & modeling of fatigue crack development in aluminium alloy 2024. PhD thesis, University of Sheffield.

F

Farhan, Muhammad (2015) Effect of gravity on inertial particle clustering and the Lagrangian attractors in Kinematic Simulation with different energy spectra. PhD thesis, University of Sheffield.

Fois, nicola (2015) Investigation and characterisation of the wear mechanisms of abradable compressor linings. PhD thesis, University of Sheffield.

G

Gorji, Sam (2015) A study of turbulence in transient channel flows. PhD thesis, University of Sheffield.

H

He, Kui (2015) Effect of body force on turbulent pipe flow. PhD thesis, University of Sheffield.

Houghton, Alexander (2015) Use of Tribological Design and Surface Engineering to Improve Riser Valve Components. PhD thesis, University of Sheffield.

Hugo, Annie-May (2015) Recycled Polymer Composites for Structural Applications. PhD thesis, University of Sheffield.

I

IOANNOU, IOANNIS (2015) A Study on the Numerical Characterisation of Short Fibre Composites. PhD thesis, University of Sheffield.

K

Kiu, Miin Fung (2015) Hot deformation and damage of Free Cutting Steel. PhD thesis, University of Sheffield.

M

Mbwadzawo, Teddy (2015) Investigating and Improving Fracture Resistance of Elastomer O-rings and Spring Seals Exposed to Rapid Gas Decompression. PhD thesis, University of Sheffield.

O

Ooi, Eng Seng (2015) Rayleigh Wave Interactions with Tribological Contacts. PhD thesis, University of Sheffield.

P

Prisutova, Jevgenija (2015) Sound propagation in air-filled pipes with inhomogeneities. PhD thesis, University of Sheffield.

R

Raza, Syed Farhan (2015) Ultrasonic welding of thermoplastics. PhD thesis, University of Sheffield.

Rose, Christopher (2015) Investigating the Efficacy of Novel Abrasive Particles in Oral Hygiene. PhD thesis, University of Sheffield.

S

Sobotta, Dorit (2015) The Aerodynamics and Performance of Small Scale Wind Turbine Starting. PhD thesis, University of Sheffield.

Song, Yilang (2015) The influence of random microstructure on wave propagation through heterogeneous media. PhD thesis, University of Sheffield.

Stephen, Joseph Temitope (2015) Condition Monitoring of Bolted Joints. PhD thesis, University of Sheffield.

Sturge, Danial (2015) The Energy Yield Impacts of Wind Farm Design and Location. PhD thesis, University of Sheffield.

T

Tongsawang, Kanok (2015) Stall Control of a NACA0015 Aerofoil at Low Reynolds Numbers. MPhil thesis, University of Sheffield.

Tse, Christopher Chi Wai (2015) Utilising inkjet printing for tissue engineering. PhD thesis, University of Sheffield.

W

Wise, DJ (2015) Disc actuators for turbulent drag reduction. PhD thesis, University of Sheffield.

Y

Yu, Ho Chun Raybin (2015) Effects of Gurney Flap on Supercritical and Natural Laminar Flow Transonic Aerofoil Performance. MPhil thesis, University of Sheffield.

Z

Zhang, Yi (2015) The effect of inkjet printed polymer on the mechanical properties of carbon fibre reinforced plastic. PhD thesis, University of Sheffield.

Zhou, Lu (2015) Characterisation of Machine Element Contacts Using Ultrasound Reflectometry. PhD thesis, University of Sheffield.

This list was generated on Thu Mar 28 01:14:18 2024 GMT.