Browse by University and Academic Department

A

Antoniadou, Ifigeneia (2013) Accounting for nonstationarity in the condition monitoring of wind turbine gearboxes. PhD thesis, University of Sheffield.

Avan, Emin Yusuf (2013) Development of a Novel Ultrasonic Method for Non-invasive Measurement of Oil Films in Piston Ring Contacts. PhD thesis, University of Sheffield.

B

Barreto, Sara (2013) BIOMECHANICAL STUDY OF THE MECHANICAL AND STRUCTURAL PROPERTIES OF ADHERENT CELLS. PhD thesis, University of Sheffield.

Brunskill, Henry Peter (2013) The Real-Time Characterisation of Dry Machine Element Contacts Using Ultrasonic Reflectometry. PhD thesis, University of Sheffield.

D

Darabi, Babak (2013) Dissipation of vibration energy using viscoelastic granular materials. PhD thesis, University of Sheffield.

Dervilis, Nikolaos (2013) A machine learning approach to Structural Health Monitoring with a view towards wind turbines. PhD thesis, University of Sheffield.

E

EROGLU, MEHMET ALI (2013) Observer based control of an magnetorheological damper. PhD thesis, University of Sheffield.

Eboibi, Okeoghene (2013) The influence of Blade Chord on the Aerodynamics and Performance of Vertical Axis Wind Turbines. PhD thesis, University of Sheffield.

Elderrat, H (2013) RESEARCH TOWARDS THE DESIGN OF A NOVEL SMART FLUID DAMPER USING A MCKIBBEN ACTUATOR. MPhil thesis, University of Sheffield.

G

Green, P.L. (2013) Nonlinear Energy Harvesting. PhD thesis, University of Sheffield.

H

Hardwick, Christopher (2013) The Effects of Third-Body Materials in the Wheel-Rail Interface. PhD thesis, University of Sheffield.

Harris, Matthew (2013) Flow Feature Aligned Mesh Generation and Adaptation. PhD thesis, University of Sheffield.

J

Jones, Stephen (2013) An experimental investigation of the fracture behaviour of particulate toughened epoxies. PhD thesis, University of Sheffield.

L

Liu, Xiaoxiao (2013) Understanding the effect of skin mechanical properties on the friction of human finger-pads. PhD thesis, University of Sheffield.

Liu, Yue (2013) Investigation on Elastomer Compatibility with Alternative Aviation Fuels. PhD thesis, University of Sheffield.

M

McDaid, Chloe (2013) Developing and Implementing Advanced Optical Diagnostics for the Investigation of Fuel and Flow Effects on Impinging Jet Flames. PhD thesis, University of Sheffield.

Mohammed, Ali (2013) Experimental Simulation of Reduction of Erosion Damage in Dies Used in Aluminium Casting. PhD thesis, University of Sheffield.

P

Pavlopoulou, Sofia (2013) On Structural Health Monitoring of Aircraft Adhesively Bonded Repairs. PhD thesis, University of Sheffield.

R

Rouholamin, Davood (2013) The controllable manufacture of porous biodegradable scaffolds produced by a novel supercritical CO2 foaming rig & Characterisations of nylon 12 parts produced by high speed sintering and laser sintering processes with various lamp powers and laser powers. PhD thesis, University of Sheffield.

S

Saleh, Khaled (2013) MODELLING AND ANALYSIS OF CHATTER MITIGATION STRATEGIES IN MILLING. PhD thesis, University of Sheffield.

Shamsudin, Zurina (2013) Fabrication of Glass Ceramic Fibres for High Temperature Applications. PhD thesis, University of Sheffield.

Shati, Abdulmaged (2013) THE INTERACTION BETWEEN RADIATION AND TURBULENT NATURAL CONVECTION IN SQUARE AND RECTANGULAR ENCLOSURES. PhD thesis, University of Sheffield.

W

Wall, Neil J (2013) Characterisation of Multiple Concentric Vortices in Hybrid Rocket Combustion Chambers. PhD thesis, University of Sheffield.

Wang, Wei (2013) Passive and active flow control studies using hybrid RANS/LES methods. PhD thesis, University of Sheffield.