White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Creators | No Grouping
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1990 | 1989 | 1985
Number of items at this level: 139.

2016

Alahmadi, Yaser (2016) On the application of an eddy viscosity turbulence model sensitized to rotation/curvature to the cyclone separator. PhD thesis, University of Sheffield.

Campos Marin, Ana (2016) In silico study of the mechanisms of cell deposition into 3D rapid prototyping scaffolds under in vitro hydrodynamic conditions. PhD thesis, University of Sheffield.

Elshukri, Fathi A. (2016) An Experimental Investigation and Improvement of Insulated Rail Joints (IRJs) End Post Performance. PhD thesis, University of Sheffield.

Gonzalez Garcia, Veronica Palma (2016) Modelling of active flow control devices using hybrid RANS/LES techniques. PhD thesis, University of Sheffield.

Howard, Thomas Peter (2016) Development of a Novel Bearing Concept for Improved Wind Turbine Gearbox Reliability. PhD thesis, University of Sheffield.

Kaka, Diyar (2016) Dynamic mechanical properties of multi-scale carbon fibre reinforced PEEK. PhD thesis, University of Sheffield.

Khosh Aghdam, Sohrab (2016) Turbulent drag reduction through wall-forcing methods. PhD thesis, University of Sheffield.

Mathur, Akshat (2016) Study of accelerating and decelerating turbulent flows in a channel. PhD thesis, University of Sheffield.

Naumann, Jack (2016) Acoustic Emission Monitoring of Wind Turbine Bearings. PhD thesis, University of Sheffield.

Ratner, Alon (2016) Hybrid steel wire strands with carbon fibre reinforced plastics. PhD thesis, University of Sheffield.

Schirru, Michele (2016) Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In-Situ. PhD thesis, University of Sheffield.

Shariatzadeh, Maryam (2016) The Effect of Mechanical Stimulation on Osteogenesis of Cell Seeded Collagen Microspheres. PhD thesis, University of Sheffield.

Suzuki, Hiroyuki (2016) Bearing Surface Optimisation on Hydrodynamic Lubrication Film with Vibration-Assisted Machining and Ultrasound Reflectometry. PhD thesis, University of Sheffield.

Ubogu, Emamode Akpofure (2016) Non-Conventional Pollutant Species Measurement and Prediction from a Gas Turbine. PhD thesis, University of Sheffield.

Yang, Jiansheng (2016) Vision-based Measurement for Combustion and Vibration Studies. PhD thesis, University of Sheffield.

Zhang, Xueqing (2016) Vibrotactile Feedback for Application on Mobile Touch Screen Devices: Effects with Age. PhD thesis, University of Sheffield.

da Rocha Pinto, João M. (2016) Wall-based feedback control of a compressible laminar boundary layer subjected to free-stream vortical disturbances. PhD thesis, University of Sheffield.

2015

Alharbi, Khaled (2015) Damage Investigation in Dual-Phase 1000 Steel and Behaviour Prediction Using Microstructure Based Modelling. PhD thesis, University of Sheffield.

Alhinai, Almajd (2015) An investigation of classifying the flow over rough surfaces into k- and d- type in turbulent channel flow. PhD thesis, University of Sheffield.

Amel, Hoda (2015) Investigating the Cyclic Performance of Laser Sintered Nylon 12. PhD thesis, University of Sheffield.

Anthistle, Thomas (2015) Modelling the Effects of Blast Loads in Rail Vehicles. PhD thesis, University of Sheffield.

Beaty, P (2015) Experimental Testing Procedures to Investigate and Improve Insulated Rail Joint Design and Life Cycle. PhD thesis, University of Sheffield.

Braun, Martin (2015) The Effects of Location and Climate Change on the Energy Consumption of Supermarkets in the UK. PhD thesis, University of Sheffield.

Brunelli, Marzia (2015) A mechanobiology study on the response to mechanical compression of mesenchymal progenitor cells cultured in a composite scaffold made of 3D Insert PCL and collagen gel. PhD thesis, University of Sheffield.

Chen, Wenqu (2015) Direct Load Monitoring in Rolling Element Bearing by Using Ultrasonic Time of Flight. PhD thesis, University of Sheffield.

Duan, Yu (2015) Study of cross flows and large flow structures in nuclear reactors. PhD thesis, University of Sheffield.

EFTHYMIADIS, PANOS (2015) Multiscale experimentation & modeling of fatigue crack development in aluminium alloy 2024. PhD thesis, University of Sheffield.

Farhan, Muhammad (2015) Effect of gravity on inertial particle clustering and the Lagrangian attractors in Kinematic Simulation with different energy spectra. PhD thesis, University of Sheffield.

Fois, nicola (2015) Investigation and characterisation of the wear mechanisms of abradable compressor linings. PhD thesis, University of Sheffield.

Gorji, Sam (2015) A study of turbulence in transient channel flows. PhD thesis, University of Sheffield.

He, Kui (2015) Effect of body force on turbulent pipe flow. PhD thesis, University of Sheffield.

Houghton, Alexander (2015) Use of Tribological Design and Surface Engineering to Improve Riser Valve Components. PhD thesis, University of Sheffield.

Hugo, Annie-May (2015) Recycled Polymer Composites for Structural Applications. PhD thesis, University of Sheffield.

IOANNOU, IOANNIS (2015) A Study on the Numerical Characterisation of Short Fibre Composites. PhD thesis, University of Sheffield.

Kiu, Miin Fung (2015) Hot deformation and damage of Free Cutting Steel. PhD thesis, University of Sheffield.

Ooi, Eng Seng (2015) Rayleigh Wave Interactions with Tribological Contacts. PhD thesis, University of Sheffield.

Prisutova, Jevgenija (2015) Sound propagation in air-filled pipes with inhomogeneities. PhD thesis, University of Sheffield.

Raza, Syed Farhan (2015) Ultrasonic welding of thermoplastics. PhD thesis, University of Sheffield.

Sobotta, Dorit (2015) The Aerodynamics and Performance of Small Scale Wind Turbine Starting. PhD thesis, University of Sheffield.

Song, Yilang (2015) The influence of random microstructure on wave propagation through heterogeneous media. PhD thesis, University of Sheffield.

Stephen, Joseph Temitope (2015) Condition Monitoring of Bolted Joints. PhD thesis, University of Sheffield.

Sturge, Danial (2015) The Energy Yield Impacts of Wind Farm Design and Location. PhD thesis, University of Sheffield.

Tongsawang, Kanok (2015) Stall Control of a NACA0015 Aerofoil at Low Reynolds Numbers. MPhil thesis, University of Sheffield.

Wise, DJ (2015) Disc actuators for turbulent drag reduction. PhD thesis, University of Sheffield.

Yu, Ho Chun Raybin (2015) Effects of Gurney Flap on Supercritical and Natural Laminar Flow Transonic Aerofoil Performance. MPhil thesis, University of Sheffield.

Zhang, Yi (2015) The effect of inkjet printed polymer on the mechanical properties of carbon fibre reinforced plastic. PhD thesis, University of Sheffield.

Zhou, Lu (2015) Characterisation of Machine Element Contacts Using Ultrasound Reflectometry. PhD thesis, University of Sheffield.

2014

Al Tubi, Issa (2014) Effects of Variable Load and Rotational Speed Conditions on Gear Micropitting in Wind Turbine Gearboxes. PhD thesis, University of Sheffield.

Baker, Alexander J (2014) A Study of Tribological Processes During the Milling of Rice. PhD thesis, University of Sheffield.

Ballil, Ahmed (2014) Numerical Simulation of Multi-Component Flows with Low to High Density Ratios. PhD thesis, University of Sheffield.

Barari, Farzad (2014) Metal foam regenerators; heat transfer and pressure drop in porous metals. PhD thesis, University of Sheffield.

Burke, Oliver (2014) Tribology of the Anti-Wear Layer Used in Flexible Oil Risers. PhD thesis, University of Sheffield.

Castleton, Holly (2014) Assessment of Design Stage Energy Prediction Models for Low Carbon Office Buildings. PhD thesis, University of Sheffield.

Coppin, Joe (2014) Aerodynamics, Stability and Shape Optimisation of Unmanned Combat Air Vehicles. PhD thesis, University of Sheffield.

Jolgam, Shaban (2014) An Efficient Numerical Method for Simulating Multiphase Flows with a General Equation of State. PhD thesis, University of Sheffield.

Katsanis, Stylianos (2014) Numerical Modelling of Wind Borne Pollution Dispersion from Open Windrow Compost Sites. PhD thesis, University of Sheffield.

Kazim, R. Y. (2014) A system dynamics approach for assessing supply chain management integrated policies and strategies in an aircraft MRO company. PhD thesis, University of Sheffield.

Liu, Sheng (2014) Simulation of Transition and Roughness Effects on Micro Air Vehicle Aerodynamics. PhD thesis, University of Sheffield.

Lovelace, Robin (2014) The energy costs of commuting: a spatial microsimulation approach. PhD thesis, University of Sheffield.

Mossa, Fouzi (2014) Flames in Tubes. PhD thesis, University of Sheffield.

Rose-Anderssen, Christen (2014) Methodologies for Practical Applications of Linnaean and Cladistic Classification of Production Systems. PhD thesis, University of Sheffield.

Shi, Yu (2014) Modelling low velocity impact behaviour of composite laminates used in aerospace. PhD thesis, University of Sheffield.

Tayefi, Pedrom (2014) The influence of contamination on the fatigue performance of electrofusion joints. EngD thesis, University of Sheffield.

Thornton, R. W. (2014) Investigating the effects of cryogenic processing on the wear performance and microstructure of engineering materials. PhD thesis, University of Sheffield.

Walker, Stuart (2014) Hydrodynamic interactions of a tidal stream turbine and support structure. PhD thesis, University of Sheffield.

Yang, Kai (2014) Comparative Study of Nonlinear Acoustic and Guided Wave Methods for Structural Damage Detection. PhD thesis, University of Sheffield.

ZHU, FENG (2014) Geometric Parameterisation and Aerodynamic Shape Optimisation. PhD thesis, University of Sheffield.

chen, zhaolin (2014) Micro Air Vehicle Design for Aerodynamic Performance and flight Stability. PhD thesis, University of Sheffield.

2013

Antoniadou, Ifigeneia (2013) Accounting for nonstationarity in the condition monitoring of wind turbine gearboxes. PhD thesis, University of Sheffield.

Avan, Emin Yusuf (2013) Development of a Novel Ultrasonic Method for Non-invasive Measurement of Oil Films in Piston Ring Contacts. PhD thesis, University of Sheffield.

Barreto, Sara (2013) BIOMECHANICAL STUDY OF THE MECHANICAL AND STRUCTURAL PROPERTIES OF ADHERENT CELLS. PhD thesis, University of Sheffield.

Brunskill, Henry Peter (2013) The Real-Time Characterisation of Dry Machine Element Contacts Using Ultrasonic Reflectometry. PhD thesis, University of Sheffield.

Darabi, Babak (2013) Dissipation of vibration energy using viscoelastic granular materials. PhD thesis, University of Sheffield.

Dervilis, Nikolaos (2013) A machine learning approach to Structural Health Monitoring with a view towards wind turbines. PhD thesis, University of Sheffield.

EROGLU, MEHMET ALI (2013) Observer based control of an magnetorheological damper. PhD thesis, University of Sheffield.

Eboibi, Okeoghene (2013) The influence of Blade Chord on the Aerodynamics and Performance of Vertical Axis Wind Turbines. PhD thesis, University of Sheffield.

Elderrat, H (2013) RESEARCH TOWARDS THE DESIGN OF A NOVEL SMART FLUID DAMPER USING A MCKIBBEN ACTUATOR. MPhil thesis, University of Sheffield.

Green, P.L. (2013) Nonlinear Energy Harvesting. PhD thesis, University of Sheffield.

Hardwick, Christopher (2013) The Effects of Third-Body Materials in the Wheel-Rail Interface. PhD thesis, University of Sheffield.

Harris, Matthew (2013) Flow Feature Aligned Mesh Generation and Adaptation. PhD thesis, University of Sheffield.

Jones, Stephen (2013) An experimental investigation of the fracture behaviour of particulate toughened epoxies. PhD thesis, University of Sheffield.

Liu, Xiaoxiao (2013) Understanding the effect of skin mechanical properties on the friction of human finger-pads. PhD thesis, University of Sheffield.

Liu, Yue (2013) Investigation on Elastomer Compatibility with Alternative Aviation Fuels. PhD thesis, University of Sheffield.

McDaid, Chloe (2013) Developing and Implementing Advanced Optical Diagnostics for the Investigation of Fuel and Flow Effects on Impinging Jet Flames. PhD thesis, University of Sheffield.

Pavlopoulou, Sofia (2013) On Structural Health Monitoring of Aircraft Adhesively Bonded Repairs. PhD thesis, University of Sheffield.

Rouholamin , Davood (2013) The controllable manufacture of porous biodegradable scaffolds produced by a novel supercritical CO2 foaming rig & Characterisations of nylon 12 parts produced by high speed sintering and laser sintering processes with various lamp powers and laser powers. PhD thesis, University of Sheffield.

Saleh, Khaled (2013) MODELLING AND ANALYSIS OF CHATTER MITIGATION STRATEGIES IN MILLING. PhD thesis, University of Sheffield.

Shamsudin, Zurina (2013) Fabrication of Glass Ceramic Fibres for High Temperature Applications. PhD thesis, University of Sheffield.

Wall, Neil J (2013) Characterisation of Multiple Concentric Vortices in Hybrid Rocket Combustion Chambers. PhD thesis, University of Sheffield.

Wang, Wei (2013) Passive and active flow control studies using hybrid RANS/LES methods. PhD thesis, University of Sheffield.

2012

Atas, Akin (2012) Strength Prediction of Mechanical Joints in Composite Laminates Based on Subcritical Damage Modelling. PhD thesis, University of Sheffield.

Chen, Li-Wei (2012) Flow Characterisation of Flames in an Acoustically Excited Chamber. PhD thesis, University of Sheffield.

Cross, Elizabeth (2012) On Structural Health Monitoring in Changing Environmental and Operational Conditions. PhD thesis, University of Sheffield.

Danao, Louis Angelo (2012) The Influence of Unsteady Wind on the Performance and Aerodynamics of Vertical Axis Wind Turbines. PhD thesis, University of Sheffield.

Edwards, Jonathan (2012) The Influence of Aerodynamic Stall on the Performance of Vertical Axis Wind Turbines. PhD thesis, University of Sheffield.

Emerson, Nicholas (2012) Development of Patient-Specific CT-FE Modelling of Bone Through Validation Using Porcine Femora. PhD thesis, University of Sheffield.

ISBILIR, OZDEN (2012) OPTIMISATION OF THE GEOMETRY OF THE DRILL BIT AND PROCESS PARAMETERS FOR CUTTING HYBRID COMPOSITE/METAL STRUCTURES IN NEW AIRCRAFTS. PhD thesis, University of Sheffield.

Mohamed, Galal F.A. (2012) Modelling damage and fracture of fibre metal laminates subject to blast loading. PhD thesis, University of Sheffield.

Mylon, Peter T (2012) Performance of Medical Gloves. PhD thesis, University of Sheffield.

Rehman, Anees ur (2012) Vibration-Based Condition Monitoring of A Turbomachinery Bladed System. PhD thesis, University of Sheffield.

Salim, SMM (2012) Experimental Study of Turbulence Generation and Control by Fractal Grids. PhD thesis, University of Sheffield.

Singleton, Roger (2012) Utilisation of chip thickness models in grinding. PhD thesis, University of Sheffield.

Wang, Qian (2012) Advanced Optical and 3D Reconstruction Diagnostics for Combustion and Fluids Research. PhD thesis, University of Sheffield.

Zhu, Juanjuan (2012) Simulation Model and Ultrasound Study for Engineering Interfaces. PhD thesis, University of Sheffield.

ghazali, mohd fairusham (2012) Leak detection using instantaneous frequency analysis. PhD thesis, University of Sheffield.

2011

Jumahat, Aidah (2011) Effect of nanofillers on thermo-mechanical properties of polymers and composite laminates. PhD thesis, University of Sheffield.

Lewis, Stephen Robert (2011) Measurement, control and enhancement of friction/traction in a simulated wheel/rail contact. PhD thesis, University of Sheffield.

2010

Barthorpe, Robert James (2010) On Model- and Data-based Approaches to Structural Health Monitoring. PhD thesis, University of Sheffield.

Yusoff, Ahmad (2010) Optimisation of variable helix end milling tools. PhD thesis, University of Sheffield.

2009

Cuamatzi Meléndez, Rubén (2009) 3D cellular automata finite element modelling of cleavage and ductile fracture. PhD thesis, University of Sheffield.

Durrani, Naveed Iqbal (2009) Hybrid RANS-LES simulations for separated flows using dynamic grids. PhD thesis, University of Sheffield.

Tomlinson, Sarah Elizabeth (2009) Understanding the friction between human fingers and contacting surfaces. PhD thesis, University of Sheffield.

2008

Cheng, Jingjing (2008) Shaken baby syndrome: simulation via computational and physical modelling. PhD thesis, University of Sheffield.

Choppin, Simon Bruce (2008) Modelling of tennis racket impacts in 3D using elite players. PhD thesis, University of Sheffield.

Edwards, Rachel Elizabeth Edwards (2008) A study of shot peening effects on fretting fatigue. PhD thesis, University of Sheffield.

Martin, Castillo Morales (2008) Examining the effects of ultrasonic impact treatment as a severe plastic deformation process on the fatigue behaviour of 2024-T3 and T150-T651 aluminium alloys. PhD thesis, University of Sheffield.

2007

Green, David (2007) The tribological effects of soot contaminated lubricants on engine components. PhD thesis, University of Sheffield.

Soberanis, Sabino Ayvar (2007) 3D CAFE modelling of ductile fracture in gas pipeline steel. PhD thesis, University of Sheffield.

2006

Karlsberg, Angela Jane (2006) Flexible Bayesian methods for archaeological dating. PhD thesis, University of Sheffield.

2005

Abdullah, Shahrum (2005) Wavelet bump extraction (WBE) for editing variable amplitude fatigue loadings. PhD thesis, University of Sheffield.

2004

Betz, Daniel C (2004) Application of optical fibre sensors for structural health and usage monitoring. PhD thesis, University of Sheffield.

2003

Chadwick, Stephen George (2003) The aerodynamic properties of tennis balls. PhD thesis, University of Sheffield.

2002

Hart, John H (2002) Supersonic ejector simulation and optimisation. PhD thesis, University of Sheffield.

Goodwill, Simon Richard (2002) The dynamics of tennis ball impacts on tennis rackets. PhD thesis, University of Sheffield.

2001

Tan, Yong Kiang (2001) A fitness landscape model for manufacturing strategy. PhD thesis, University of Sheffield.

2000

Goh, Phaik Lan (2000) The implementation of total quality management in small and medium enterprises. PhD thesis, University of Sheffield.

Lewis, Roger (2000) Wear of diesel engine inlet valves and seats. PhD thesis, University of Sheffield.

Moatamedi, Mojtaba (2000) Safe dynamic design of structures. PhD thesis, University of Sheffield.

1999

Paran, Alexander P (1999) The low-velocity impact response of thin, stiffened CFRP panels. PhD thesis, University of Sheffield.

1998

Shattaf, Nasser Rashid (1998) Development of high durability concrete for the Arabian Gulf environment. PhD thesis, University of Sheffield.

1997

Chodari, Muhammad Aslam (1997) Development of a generic model for a manufacturing management system. PhD thesis, University of Sheffield.

Hu, Haiyun (1997) Fatigue and corrosion fatigue crack growth resistance of RQT501 steel. PhD thesis, University of Sheffield.

1996

Lim, Lik-Beng (1996) Some aspects of the crashworthiness of rail vehicles. PhD thesis, University of Sheffield.

1995

Darwish, Abdulhanan A. (1995) Development of high performance concrete using combinations of mineral admixtures. PhD thesis, University of Sheffield.

Wu, Xiao Dong (1995) Experimental and theoretical studies of corrosion fatigue in a high strength steel. PhD thesis, University of Sheffield.

1990

Nasserzadeh Sharifi, Vida (1990) Optimization study of incineration in a incinerator with a vertical radiation shaft. PhD thesis, University of Sheffield.

1989

Oraby, Samy El-Sayed (1989) Mathematical modelling and in-process monitoring techniques for cutting tools. PhD thesis, University of Sheffield.

Yang, Zhiyan (1989) Numerical simulation of incompressible and compressible flow. PhD thesis, University of Sheffield.

1985

Hobson, Paul David (1985) The growth of short fatigue cracks in a medium carbon steel. PhD thesis, University of Sheffield.

This list was generated on Sun Jun 26 10:00:30 2016 BST.