Browse by University and Academic Department

A

Al-Saadi, Ahmed (2018) An experimental investigation of damage detection of CFRP using an electrical resistance change method. PhD thesis, University of Sheffield.

Alasadi, Alaa (2018) Development of laser direct writing for fabrication of micro/nano-scale magnetic structures. PhD thesis, University of Sheffield.

Aldulaim, Qayes A. Abbas (2018) Magnetic and Mechanical Properties of Magnetostrictive FeGaSiB Films. PhD thesis, University of Sheffield.

Almansoori, Alaa (2018) Feasibility Study of Plasma Treatment of Clays and Polymers for Nanocomposite Manufacture by Laser Sintering. PhD thesis, University of Sheffield.

Alshabbani, Haydar Swiry Rahi (2018) Metal Matrix Composites with Diamond for Abrasion Resistance. PhD thesis, University of Sheffield.

Anand, Gautam (2018) Simulation of High-Entropy Materials. PhD thesis, University of Sheffield.

Asghar, Muhamamd Sajid Ali (2018) In-Situ Generation and Dissolution of Nano Structures by Liquid and Dry Electron Irradiation Method. PhD thesis, University of Sheffield.

B

Banfield, Sarah (2018) Development and evaluation of aluminium-based thin films as potential alternatives to cadmium coatings. PhD thesis, University of Sheffield.

Bostanchi, Samira (2018) Development of new ceramic nano-composites for the next generation prosthetic devices. PhD thesis, University of Sheffield.

Brif, Anastasia (2018) Multi-dimensional Structuring of Native Silk. PhD thesis, University of Sheffield.

C

Clarke, Jack (2018) Conditioning of Legacy Radioactive Wastes Requiring Additional Treatment. PhD thesis, University of Sheffield.

Cooper, Jack (2018) Amorphous Carbon Coating Systems for Pressurised Water Reactor Tribological Applications. EngD thesis, University of Sheffield.

Cunliffe, Andrew (2018) Origin of Properties in High Entropy Alloys. PhD thesis, University of Sheffield.

D

Dang, Yun (2018) Electrical properties of pure and doped rutile ceramics. PhD thesis, University of Sheffield.

Dong, Bo (2018) Neutron Diffraction Studies of Lithium-based Battery Materials. PhD thesis, University of Sheffield.

F

Fiaz, Ahssad (2018) Study Of Polymer Composites Containing Nano- And Micro-particles For Materials Engineering Applications. PhD thesis, University of Sheffield.

Freeman, Felicity (2018) Structuring Difference: The Additive Manufacture of Spatially & Functionally Differentiated Microstructures. PhD thesis, University of Sheffield.

G

Galanakis, Nikolaos (2018) Development and application of topological methods to characterise radiation damage effects in borosilicate and iron phosphate glasses. PhD thesis, University of Sheffield.

Galvin, Thomas (2018) The use of M(n+1)AX(n) Phases in accident tolerant fuel cladding. PhD thesis, University of Sheffield.

Garcia Martinez, Marcela Armine (2018) Characterising Contraction in a Tissue-Engineered Buccal Mucosa Model with Raman Spectroscopy. PhD thesis, University of Sheffield.

Grema, Lawan (2018) The effects of composition on the Thermal, Mechanical and Electrical Properties of Alumino-borosilicate Sealing Glasses for Solid Oxide Fuel Cell (SOFC) Applications. PhD thesis, University of Sheffield.

H

Hancock, David (2018) Employing Additive Manufacturing for Fusion High Heat Flux Structures. PhD thesis, University of Sheffield.

Holmes, B. C. (2018) Modelling the effects of moisture absorption on the thermo-mechanical properties of thermoset resins. PhD thesis, University of Sheffield.

Howson, Michael (2018) Heat Treatment Modelling of Large Nuclear Forgings. EngD thesis, University of Sheffield.

I

Iamvasant, Chanon (2018) Coating Mechanical and Acoustical Design Considerations for Resistance to Solid and Liquid Particle Impact. PhD thesis, University of Sheffield.

K

Karouni, Faris (2018) Numerical Simulation of Hydrogen Removal from Molten Steel in the Vacuum Arc Degasser. PhD thesis, University of Sheffield.

Khulief, Zuheir (2018) Tribological, Electrochemical, and Tribocorrosion Behaviour of New Titanium Biomedical Alloys. PhD thesis, University of Sheffield.

Killeen, Matthew (2018) Developing Fundamental Models of Colloid Transport and Absorption in Sand Filters. PhD thesis, University of Sheffield.

Kitchen, Jared (2018) Experimental Assessment of Heat Treatments on Large Forgings for Nuclear Applications by Microstructure and Mechanical Property Assessment at the Correct Length Scale. PhD thesis, University of Sheffield.

Kwamman , Tanagorn (2018) Study of Carbide Composites and Their Interfaces for Generation IV Nuclear Reactor. PhD thesis, University of Sheffield.

L

Lawson, S M (2018) Radiation Damage and Helium Bubble Formation in Ca(1-x)La(2x/3)TiO3 Perovskite Ceramics. PhD thesis, University of Sheffield.

M

Mann, Colleen (2018) A study of the Dissolution of UK Nuclear Waste Glass in Cement Waters. PhD thesis, University of Sheffield.

Meshreghi, Husein (2018) Fabrication and Characterisation of Regular and Complex Shapes Alumina from Aluminium Foil by PEO Process. PhD thesis, University of Sheffield.

Miah, Kamal (2018) Use of Waste Resources in the Sinter Plant in Ironmaking. PhD thesis, University of Sheffield.

Miekina, Michal (2018) Crystal formation during the vitrification of HLW in Ca/Zn base glass. PhD thesis, University of Sheffield.

Mohammadsalih, Zaid (2018) Preparation, Characterization, and Properties of Polymer Graphene Nanocomposites. PhD thesis, University of Sheffield.

Mosalagae, Mosalagae (2018) Porous Copper by the Lost Carbonate Sintering - Powder Metallurgy Process Applied to Tape Casting. PhD thesis, University of Sheffield.

Mundra, Shishir (2018) Corrosion of Steel in Alkali-Activated Materials. PhD thesis, University of Sheffield.

Murakami, Shunsuke (2018) BaTiO3-BiFeO3 based lead-free ceramics for actuator applications. PhD thesis, University of Sheffield.

N

Namus, Righdan (2018) CoCrMo alloys in hip and knee replacements application. PhD thesis, University of Sheffield.

Naranjo Espinosa, Jose Manuel (2018) THE EFFECT OF DEOXIDATION PRACTICE ON NON-METALLIC INCLUSIONS AND THEIR EFFECT ON MECHANICAL PROPERTIES OF A LOW ALLOY STEEL. PhD thesis, University of Sheffield.

Nordin, Norhuda Hidayah (2018) Phase transformation in High Entropy Bulk Metallic Glass (HE-BMG) and Lamellar Structured-High Entropy Alloy (HEA). PhD thesis, University of Sheffield.

Nutter, John (2018) Direct TEM Observation of the Movement of the Austenite-Ferrite Interface in Steels. PhD thesis, University of Sheffield.

P

Pennington, Jamie (2018) Effect of Hot Working and Heat Treatment Parameters on the Microstructure and Properties of ZERON® 100 Superduplex Stainless Steel. PhD thesis, University of Sheffield.

Pishgahi Fard, Zahra (2018) Development of The Next Generation Ceramics for Orthopaedic Application. PhD thesis, University of Sheffield.

Prentice, Dale/DPP (2018) Thermodynamic modelling of ultra-long-term durability of cementitious binders for waste immobilisation. PhD thesis, University of Sheffield.

R

Reddish, S (2018) The Application of Mixed Reality Within Civil Nuclear Manufacturing and Operational Environments. EngD thesis, University of Sheffield.

Richards, Graham PC (2018) The formation and tensile behaviour of alpha-case in fine-grained Ti-6Al-4V. PhD thesis, University of Sheffield.

S

Shbeh, Mohammed (2018) Titanium Foams via Metal Injection Moulding in Combination with a Space Holder. PhD thesis, University of Sheffield.

Singh, Dharaminder (2018) 2D Patterning and 3D Printing of Novel PGSm for Peripheral Nerve Repair and Soft Tissue Engineering. PhD thesis, University of Sheffield.

Snell, Robert (2018) The Development of Novel Silver Brazing Alloys. PhD thesis, University of Sheffield.

Sparkes, James (2018) Understanding the flow behaviour of native silk proteins. PhD thesis, University of Sheffield.

T

Tao, Xiao (2018) Investigations on the role of Cr, Mn and Ni on the formation, structure, and metastability of nitrogen-expanded austenite on Fe-based austenitic alloys under triode-plasma nitriding. PhD thesis, University of Sheffield.

Taylor, Caroline (2018) MATERIAL SELECTION FOR FABRICATING AN INTERNAL GUIDANCE SCAFFOLD FOR IMPROVING CURRENT NERVE GUIDE CONDUITS. PhD thesis, University of Sheffield.

Thornber, Stephanie May (2018) The Development of Zirconolite Glass-Ceramics for the Disposition of Actinide Wastes. PhD thesis, University of Sheffield.

Todd, Mark A. (2018) A computer controlled quenching simulator for observing phase transformation kinetics in metals by electrical resistance measurements. PhD thesis, University of Sheffield.

U

Uddin, Muhammad Khawaja Hammad (2018) INTRODUCTION AND DEVELOPMENT OF ALUMINIUM ION FREE SILICATE BASED BIOACTIVE GLASS IONOMER CEMENT BASED ON GLASS FLAKES AND SETTING MODIFIER (CITRATE) FOR DIRECT POSTERIOR DENTAL RESTORATIONS. PhD thesis, The University of Sheffield.

W

WEN, YAHUI (2018) Graphene-based thermosetting polymer nanocomposites: unsaturated polyester and hyperbranched polyester. PhD thesis, University of Sheffield.

Wally, Zena J (2018) Titanium Alloy Lattices with Regular and Graded Porosity for Dental Implant Applications. PhD thesis, University of Sheffield.

Ward, Robyn Elizabeth (2018) Multi-scale Simulation of Electroceramics. PhD thesis, University of Sheffield.

Wright, Kelly (2018) Investigating Fibroblast Involvement in Vascular Inflammation Using Co-Culture Models. PhD thesis, University of Sheffield.

Wu, Patrick (2018) Composition-Electrical Property Correlations of Doped Na0.5Bi0.5TiO3 Ceramics. PhD thesis, University of Sheffield.