Browse by University and Academic Department

A

Abbasi, Erfan (2015) Processing and Structure of High Strength Steels. PhD thesis, University of Sheffield.

Alotaibi, Nouf (2015) Rutile-TiO2 based materials for lithium ion batteries. PhD thesis, University of Sheffield.

Armah, Nii Armah (2015) Quantitative Analysis of Stenting Effects on Cellular Response. PhD thesis, University of Sheffield.

B

B Qasim, Syed Saad (2015) Development of a novel functionally graded guided tissue regenerative membrane for periodontal lesions. PhD thesis, University of Sheffield.

C

Chavda, Mehul (2015) Phosphate-modified calcium aluminate cements. PhD thesis, University of Sheffield.

F

Frydrych, Martin (2015) Biomimetic elastomeric poly(glycerol sebacate)-based scaffolds for adipose tissue engineering. PhD thesis, University of Sheffield.

G

Gonzalez-Rodriguez, Jesus Alberto (2015) The mechanical response to contact of Soda Lime Silica float glass and the effects of hydration and high temperature. PhD thesis, University of Sheffield.

H

Hales, Andrew (2015) Metal Injection Moulding of Inconel 718 using a Water Soluble Binder System. MPhil thesis, University of Sheffield.

Heath, Paul (2015) Alternative Processing Methods for the Thermal Treatment of Radioactive Wastes. PhD thesis, University of Sheffield.

Hernández-Nava, Everth (2015) A study on the mechanical properties of micro-truss Ti-6Al-4V materials fabricated by Electron Beam Melting. PhD thesis, University of Sheffield.

Hopper, Andrew (2015) Development of Functionalised Carbon Based Substrates for Neuronal Cell Culture and Production of Carbon Nanoparticles for Bioimaging Applications. PhD thesis, University of Sheffield.

J

Jarkaneh, Rouzbeh (2015) Novel Oxynitride Lithium Ion Conductors. PhD thesis, University of Sheffield.

Justin, Richard (2015) Chitosan-graphene nanocomposite microneedle arrays for transdermal drug delivery. PhD thesis, University of Sheffield.

K

Karagianni, Eleftheria (2015) Development of bond coat alloy(s) for Ni based superalloys for low emission gas turbine technology for H2 rich Syngas. PhD thesis, University of Sheffield.

Karolia, Raisa (2015) Investigating the cleaning efficacy of novel oral care formulations. PhD thesis, University of Sheffield.

M

Madeddu, Silvia (2015) Alkaline-based extraction of Mg(OH)2 from magnesium silicate minerals for CO2 capture and storage. PhD thesis, University of Sheffield.

Mayzan, Mohd Zul Hilmi (2015) Graphite Immobilisation in Glass Composite Materials. PhD thesis, University of Sheffield.

Mian, Salman Aziz (2015) Raman spectroscopic analysis of normal, abnormal and irradiated oral mucosa: A tissue engineered and ex vivo approach. PhD thesis, University of Sheffield.

Mobasher, Neda (2015) Ba(OH)2-Na2SO4-BFS cement composites for the encapsulation of sulphate bearing nuclear waste. PhD thesis, University of Sheffield.

Myers, Rupert J (2015) Thermodynamic Modelling of CaO-Al2O3-SiO2-H2O-Based Cements. PhD thesis, University of Sheffield.

N

Nanpazi, Amir (2015) Design and development of Cr-Si based Intermetallic alloys. PhD thesis, University of Sheffield.

Nelson, Jack (2015) Study of the Effects of Cr, Hf and Sn with Refractory Metal Additions on the Microstructure and Properties of Nb-Silicide Based Alloys. PhD thesis, University of Sheffield.

O

OBASOHAN, E (2015) Study of Steelmaking Reactions of Blast Furnace Hot-Metal. PhD thesis, University of Sheffield.

P

Papadimitriou, Ioannis/IP (2015) PHASE EQUILIBRIA STUDIES IN Nb-RICH SYSTEMS. PhD thesis, University of Sheffield.

Q

Qasim, Syed Saad B (2015) Development of novel functionally graded guided tissue regenerative membrane for periodontal lesions. PhD thesis, University of Sheffield.

Qian, Feng (2015) Microstructural evolution of Mn-based maraging steels and their influences on mechanical properties. PhD thesis, University of Sheffield.

R

Raza, Ahtasham (2015) DEVELOPMENT OF 3D SKIN MODELS FOR THE DETECTION OF HUMAN MELANOMA USING PHOSPHORESCENCE LIFETIME IMAGING MICROSCOPY. PhD thesis, University of Sheffield.

S

Sherborne, Colin (2015) The development and characterisation of biocompatible emulsion templated foams for additive manufacturing. PhD thesis, University of Sheffield.

Sparks, David J (2015) Simulating the Role of Molecular Binding to Mineral Surfaces: from Biomineral Growth to Cell Attachment. PhD thesis, University of Sheffield.

T

Talari, A C S (2015) Raman spectroscopic analysis to identify chemical changes associated with different subtypes of breast cancer tissue samples. PhD thesis, University of Sheffield.

Tan, Shengheng (2015) The incorporation and solubility of sulphate, chloride and molybdate anions in borosilicate and aluminosilicate glasses. PhD thesis, University of Sheffield.

Tweddle, Andrew (2015) Study of the effect of Ge and Y additions on the microstructure, phase stability and environmental degradation of Nb silicide alloys. PhD thesis, University of Sheffield.

U

Uttley, Jim (2015) Investigating the visual tasks of pedestrians and how one of these tasks, obstacle detection, is influenced by lighting. PhD thesis, University of Sheffield.

W

Watkins, Geraint (2015) Development of a High Temperature Titanium Alloy for Gas Turbine Applications. MPhil thesis, University of Sheffield.

Wilson, Peter (2015) High Refractive Index Silicate Fibres for Cure Monitoring of Epoxy Matrix Composites. PhD thesis, University of Sheffield.

Y

Yen, Ming-Huei (2015) Self-Assembly of Minidendrons in 2D and 3D Liquid Crystal Lattices and Superlattices. PhD thesis, University of Sheffield.

Yorucu, Ceyla (2015) Raman analysis of tissue engineered normal skin and melanoma. PhD thesis, University of Sheffield.