White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Creators | No Grouping
Jump to: 2017 | 2016 | 2015 | 2014
Number of items at this level: 45.

2017

Animashaun, Lukman Aremu (2017) Tribochemistry of Boron-Containing Lubricant Additives on Ferrous Surfaces for Improved Internal Combustion Engine Performance. PhD thesis, University of Leeds.

Barrie, Jenifer (2017) Next generation of atraumatic laparoscopic instruments through analysis of the instrument-tissue interface. PhD thesis, University of Leeds.

Bello, Omoregbe (2017) Calcium Carbonate Scale Deposition Kinetics on Stainless Steel Surfaces. PhD thesis, University of Leeds.

Burkle, Daniel Phillip (2017) Understanding the Formation of Protective FeCO3 on to Carbon Steel Pipelines during CO2 Corrosion. PhD thesis, University of Leeds.

Khan, Thawhid Ahmed (2017) Swash Plate Axial-Piston Hydraulic Motors: A Study of Surface Protective Treatments for the Piston/Cylinder Interface. PhD thesis, University of Leeds.

2016

Al-damook, Amer Jameel Shareef (2016) Design Optimisation and Analysis of Heat Sinks for Electronic Cooling. PhD thesis, University of Leeds.

Bates, Luke Robert (2016) Characterisation of reaction propagation from auto-ignition. PhD thesis, University of Leeds.

Brady, Gemma Ann (2016) Energy Efficiency in Data Centres and the Barriers to Further Improvements: An Interdisciplinary Investigation. PhD thesis, University of Leeds.

Chen, Nini (2016) Premixed combustion of high calorific value gases. PhD thesis, University of Leeds.

Chi, YongQiang (2016) Density driven Natural Convection Heat Transfer in fully immersed Liquid-Cooled Data Centre Application. PhD thesis, University of Leeds.

De Motte, Rehan Anthony (2016) A Combined Experimental and Modelling Approach to Elucidate FeCO3 Scale Formation Kinetics. PhD thesis, University of Leeds.

Ghanbarzadeh, Ali (2016) Mechano-Chemical Modelling of Boundary Lubrication. PhD thesis, University of Leeds.

Khaemba, Doris Nekesa (2016) Raman spectroscopic studies of friction modifier Molybdenum DialkyldiThioCarbamate (MoDTC). PhD thesis, University of Leeds.

Motamen Salehi, Farnaz (2016) The Effect of Oil Properties on Engine Oil Pump Failure Mechanisms. PhD thesis, University of Leeds.

Mumby, Richard David (2016) Experimental Characterisation of Fuel Blends. PhD thesis, University of Leeds.

Ofune, MacDonald Azubuike (2016) Development of Single Cam Rig for Accurate Simulation of Valve Train Tribochemistry. PhD thesis, University of Leeds.

Onumata, Yasushi (2016) Working Mechanism of Organic Friction Modifiers on Steel and Paper Materials. PhD thesis, University of Leeds.

Pohl, Julien (2016) Turbine Stator Well Heat Transfer and Design Optimisation Using Numerical Methods. PhD thesis, University of Leeds.

Rothwell, Benjamin Charles (2016) Design of Robust PTFE Faced Bearings for Performance and Reliability in Large Rotating Machinery. PhD thesis, University of Leeds.

Taleb, Wassim (2016) Nanotechnology for corrosion control Silsesquioxane based nanofillers for iron carbonate film enhancement. PhD thesis, University of Leeds.

Vengadasalam, Kirijen (2016) Computational modelling of coalescence filtration process. PhD thesis, University of Leeds.

2015

Alkasmoul, Fahad Saleh (2015) Characterisation of the Properties and Performance of Nanofluid Coolants with Analysis of Their Feasibility for Datacentre Cooling. PhD thesis, University of Leeds.

Bell, Ashley Marie (2015) Micro-Scale Bio-Inspired Structured Polymer Surfaces for Tissue Adhesion. PhD thesis, University of Leeds.

Chandler, James Henry (2015) Direct current electrical resistance measurement techniques for assessment of colorectal cancer during laparoscopic surgery. PhD thesis, University of Leeds.

Ciolkowski, Michal (2015) Mitigation of corrosion and scale by combined inhibitors. PhD thesis, University of Leeds.

Delbosc, Nicolas (2015) Real-Time Simulation of Indoor Air Flow using the Lattice Boltzmann Method on Graphics Processing Unit. PhD thesis, University of Leeds.

Hua, Yong (2015) An Experimental Study of Corrosion for Long Distance Carbon Transportation Pipelines. PhD thesis, University of Leeds.

Lanigan, Joseph Liam (2015) Tribochemical Analysis of Si-Doped and Non-Doped Diamond-Like Carbon for Application Within the Internal Combustion Engine. PhD thesis, University of Leeds.

Materego, Myeji Chrysostom (2015) Auto-ignition characterisation of synthetic fuels via Rapid Compression Machine. PhD thesis, University of Leeds.

Mayfield, William Henry (2015) Development of a Novel Amphibious Locomotion System for use in Intra-Luminal Surgical Procedures. PhD thesis, University of Leeds.

Rai, Yugal (2015) In-situ Interface Chemical Characterisation of a Boundary Lubricated Contact. PhD thesis, University of Leeds.

Russell, Louise (2015) The Design and Development of an Intelligent Atraumatic Laparoscopic Grasper. PhD thesis, University of Leeds.

Taherkhani, Ali Reza (2015) Computational fluid dynamics based optimisation of emergency response vehicles. PhD thesis, University of Leeds.

2014

Abdalla, Ayad A. (2014) Bilayer channel and free-surface thin film flow over topography. PhD thesis, University of Leeds.

Almaneea, Abdulmajeed H (2014) Thermal analysis of liquid immersed electronics for data centres. PhD thesis, University of Leeds.

Aribo, Sunday (2014) Corrosion and erosion-corrosion behaviour of lean duplex stainless steels in marine and oilfield environments. PhD thesis, University of Leeds.

Ismail, Azzura (2014) Seawater as a hydraulic fluid; corrosion mechanisms and rates of engineering materials. PhD thesis, University of Leeds.

Ivonye, Ikechukwu C. (2014) Corrosion processes and mechanisms in the presence of MonoEthylene Glycol (MEG). PhD thesis, University of Leeds.

Lin, Yu-Sheng (2014) Tissue manipulation using nano-particles ferrofluids for minimal access surgical applications. PhD thesis, University of Leeds.

Mitchell, Karen Claire (2014) Microencapsulation for Next Generation Lubricants. PhD thesis, University of Leeds.

Raske, Nicholas (2014) A Computational and Experimental Investigation of Discrete Cell Gravure Roll Coating. PhD thesis, University of Leeds.

Sanders, Laura (2014) An integrated study of corrosion and scale interactions in the absence and presence of combined chemicals. PhD thesis, University of Leeds.

Subhono, Boya (2014) Deploying nanotechnology for oil and gas flow assurance: Understanding the transport and penetration of nano-particles in porous media. PhD thesis, University of Leeds.

Tolaieb, Benissa M. Ali (2014) Barium sulphate surface deposition kinetics and inhibition in dynamic flow systems. PhD thesis, University of Leeds.

Ukpai , Jonathan I (2014) Erosion-corrosion characterisation for pipeline materials using combined acoustic emission and electrochemical monitoring. PhD thesis, University of Leeds.

This list was generated on Tue Sep 26 14:07:57 2017 BST.