White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Creators | No Grouping
Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2008 | 2007 | 2006 | 2005 | 2003 | 2001 | 1999 | 1998 | 1997 | 1996 | 1993 | 1991 | 1990 | 1989 | 1988 | 1986 | 1984 | 1983 | 1981 | 1979 | 1978 | 1976 | 1974 | 1973 | 1971 | 1970 | 1969
Number of items at this level: 78.

2014

Alhazmi, Nahla Eid (2014) Thermal conductivity of proton exchange membrane fuel cell components. PhD thesis, University of Leeds.

Castle, Elinor Grace (2014) Undercooling-mediated growth transitions in rapidly solidified Cu-Ni alloys: Towards the elucidation of the fundamental mechanism behind ‘spontaneous grain refinement’ in undercooled metallic melts. PhD thesis, University of Leeds.

Hardcastle, Trevor Peter (2014) Ab initio modelling of low-dimensional systems. PhD thesis, University of Leeds.

Weekes, Shemaiah Matthias (2014) Small-scale wind energy: methods for wind resource assessment. Integrated PhD and Master thesis, University of Leeds.

2013

Altaher, Mohamed Alalim (2013) Combustion and emissions of alternative fuels in gas turbines. PhD thesis, University of Leeds.

Biller, Patrick (2013) Hydrothermal processing of microalgae. PhD thesis, University of Leeds.

Efika, Emmanuel Chidi (2013) Hydrogen rich syngas from the pyrolysis and gasification of solid waste and biomass. PhD thesis, University of Leeds.

Faraj, Yousef (2013) Measurement and visualisation of slurry flow using electrical resistance tomography. PhD thesis, University of Leeds.

Haji Ibrahim, Raimie Hebriyah (2013) Fundamentals of torrefaction of biomass and its environmental impacts. PhD thesis, University of Leeds.

Harrison, Gillian (2013) New fuels, new rules? Modelling policies for the uptake of low carbon vehicles within an ethical framework. Integrated PhD and Master thesis, University of Leeds.

Lan, Zhipeng (2013) The structural role of sodium dithionate impurity in the habit modification of sodium chlorate single crystals. PhD thesis, University of Leeds.

Manga, Mohamed Soyeb Abdul Razak (2013) Investigating sterically-stabilised pH-responsive Pickering emulsifiers as microcapsule membranes. PhD thesis, University of Leeds.

Millward-Hopkins, Joel Thomas (2013) Predicting the wind resource available to roof-mounted wind turbines in urban areas. PhD thesis, University of Leeds.

Motaman, Shahed (2013) High-speed imaging and computational modelling of close-coupled gas atomization. PhD thesis, University of Leeds.

Murray, Matthew (2013) Femtosecond pulsed laser deposition as a novel route for nanocomposite photonic materials on silicon. PhD thesis, University of Leeds.

Na'inna, Abdulmajid Muhammed (2013) Effects of obstacle separation distance on gas explosions. PhD thesis, University of Leeds.

Okeke, George Obiora Ugochukwu (2013) Physico-thermal properties of TiO2 nanoparticles using molecular dynamics simulations with relevance to thermal conductance of nanofluids. PhD thesis, University of Leeds.

Pasha, Massih (2013) Modelling of flowability measurement of cohesive powders using small quantities. PhD thesis, University of Leeds.

Pickard, Samuel Colin (2013) Oxygen-enriched biomass combustion studies and an analysis of the development of the carbon capture and storage industry in the UK. Integrated PhD and Master thesis, University of Leeds.

Qaisar, Sayyed Adam (2013) Fatigue and high temperature behaviour of the La-doped bismuth-ferrite lead-titanate system. PhD thesis, University of Leeds.

Rice, Hugh (2013) Transport and deposition behaviour of model slurries in closed pipe flow. PhD thesis, University of Leeds.

Waheed, Qari Muhammad Khalid (2013) Ultra-high temperature steam gasification of biomass. PhD thesis, University of Leeds.

Wallace, Rachel (2013) Physicochemical characterisation of zinc oxide nanoparticles for use in toxicity studies. PhD thesis, University of Leeds.

2012

Aljumaiah, Omar Abdulaziz O. (2012) Combustion products from ventilation controlled fires: toxicity assessment and modelling. PhD thesis, University of Leeds.

Garba, Mohammed Umar (2012) Prediction of ash deposition for biomass combustion and coal/biomass co-combustion. PhD thesis, University of Leeds.

Gudka, Bijal Ashwin (2012) Combustion characteristics of some imported feedstocks and short rotation coppice (SRC) willow for UK power stations. PhD thesis, University of Leeds.

Jiang, Siyi (2012) An examination of sonocrystallization kinetics of l-glutamic acid. PhD thesis, University of Leeds.

Johnson, Robert (2012) Hydrothermal processing of biomass and related model compounds. PhD thesis, University of Leeds.

Larsen, Kristofer Jon (2012) Pulverised biomass and coal co-firing simulation using computational fluid dynamics :A numerical investigation into the aerodynamics of non-spherical particles and full scale combustion for pulverised fuel applications. PhD thesis, University of Leeds.

Molinder, Roger Axel (2012) CO2 capture materials for sorption enhanced steam reforming. PhD thesis, University of Leeds.

Zhao, Yanlin (2012) Methods for electrical impedance spectroscopy and tomography characterising particles in suspensions and crystallisation processes. PhD thesis, University of Leeds.

Zhao, Zhanxiang (2012) Pulsed laser deposition and characterisation of rare earth doped glass-polymer optical materials. PhD thesis, University of Leeds.

2011

Bigg, Timothy David (2011) Quenching and partitioning - a new steel heat treatment concept. PhD thesis, University of Leeds.

Li, Yongliang (2011) Cryogen based energy storage: process modelling and optimisation. PhD thesis, University of Leeds.

Palizdar, Yahya (2011) Understanding the effect of aluminium on the microstructure on low level nitrogen steel. PhD thesis, University of Leeds.

Witharana, S. (2011) Thermal transport in nanofluids: boiling heat transfer. PhD thesis, University of Leeds.

2010

Pimenidou, Panagiota (2010) Novel process of hydrogen production from liquids of biomass origin. PhD thesis, University of Leeds.

Seabourne, Che Royce (2010) Electron energy-loss spectroscopy: DFT modelling and application to experiment. PhD thesis, University of Leeds.

2008

Harbottle, D. (2008) Physical modelling of colloidal slurry flows. PhD thesis, University of Leeds.

Kasmani, Rafiziana Md (2008) Vented gas explosions. PhD thesis, University of Leeds.

Mendoza, Adalberto Rosales (2008) Relationship between Microstructure, Properties and HICC Resistance of HSLA steel weld metals. PhD thesis, University of Leeds.

Ziehn, Tilo (2008) Development and application of global sensitivity analysis methods in environmental and safety engineering. PhD thesis, University of Leeds.

2007

Kubacki, Michal Lukasz (2007) Co-Pyrolysis and Co-Combustion of Coal and Biomass. PhD thesis, University of Leeds.

2006

Alias, Hajar (2006) Engineered nanofields for heat transfer process intensification. PhD thesis, University of Leeds.

Engels, Jonathan (2006) An expert management system for surface tailings storage. PhD thesis, University of Leeds.

2005

Boddy, John William Douglas (2005) The influence of meteorology, urban topography and traffic on the variability in concentrations of a traffic-related pollutant in urban street canyons. PhD thesis, University of Leeds.

2003

Woolley, Robert Michael (2003) Conditional moment closures for turbulent reacting flows. PhD thesis, University of Leeds.

Yuill, Gavin John (2003) Simulation of the generation and propagation of blast induced shock waves. PhD thesis, University of Leeds.

2001

Rojas, Néstor Y. (2001) Diesel Exhaust System Influences on Transient Particulate Emissions and Particle Size Distribution. PhD thesis, University of Leeds.

Sezalli, Yussef Haji Ali Mirza (2001) Process and operator performance analysis in process operational safety. PhD thesis, University of Leeds.

1999

Khalokakaie, Reza (1999) Computer-aided optimal open pit design with variable slope angles. PhD thesis, University of Leeds.

1998

Chen, Bing Hui (1998) Feature extraction and knowledge discovery in process operation analysis. PhD thesis, University of Leeds.

1997

Samardzjia, Nikola (1997) Nonlinear analysis and control of chemical reactors. PhD thesis, University of Leeds.

1996

Maggs, Steven James (1996) Intermetallic phase selection in dilute Al-Fe-Si alloys. PhD thesis, University of Leeds.

Pearce, Dominic Robert (1996) The characterisation of rock masses from laboratory and field studies of the velocity and attenuation of seismic waves. PhD thesis, University of Leeds.

1993

Xu, Chaoshui (1993) Fracture mechanics and its application in rock excavation. PhD thesis, University of Leeds.

1991

Taylor, Simon Crispin (1991) Burning velocity and the influence of flame stretch. PhD thesis, University of Leeds.

1990

Rainforth, William Mark (1990) Metal ceramic wear mechanisms. PhD thesis, University of Leeds.

Roshani, Shahram (1990) Elucidation of local and global structural properties of packed bed configurations. PhD thesis, University of Leeds.

1989

Zhang, Jian-Gou (1989) Factors affecting the kinetics of froth flotation. PhD thesis, University of Leeds.

1988

Azhakesan, M (1988) An Investigation of Coal Gasification by Rapid Heating Techniques. PhD thesis, University of Leeds.

Warner, Terence Edwin (1988) An Electrochemical Study of the Oxidative Dissolution of Synthetic Nickel-Iron Sulphide Minerals in Aqueous Media. PhD thesis, University of Leeds.

1986

Asere, Abraham Awolola (1986) Gas Turbine Combustor Wall Cooling. PhD thesis, University of Leeds.

1984

Abdul-Hussein, Abbas (1984) Nitriding of aluminium-containing steels. PhD thesis, University of Leeds.

1983

Abdullah, N (1983) Experimental investigation of a regenerative catalytic reactor. PhD thesis, University of Leeds.

1981

Hollins, S.J. (1981) Development of an apparatus to investigate the thermal characteristics of regenerative heat exchangers. PhD thesis, University of Leeds.

1979

Linnhoff, Bodo (1979) Thermodynamic Analysis in the Design of Process Networks. PhD thesis, University of Leeds.

1978

Aghan, Robert Leslie (1978) High strain deformation of steels. PhD thesis, University of Leeds.

Mosalamy, Fathy Helmy (1978) An investigation of the effects of phosphates and other additives on the calcium oxide-alumina system. PhD thesis, University of Leeds.

1976

Cockcroft, C.S. (1976) Investigation of a Thermally Regenerative Reactor System. PhD thesis, University of Leeds.

Dunbobbin, Brian Roy (1976) Analysis of the operational characterisics and stablilty of multitubular reactors. PhD thesis, University of Leeds.

1974

Naim, Hussam M (1974) Analysis of the dynamics and stability of fixed bed reactors. PhD thesis, University of Leeds.

Wootton, David (1974) Aspects of energy requirements for rock drilling. PhD thesis, University of Leeds.

1973

Adderley, Colin Ivan (1973) The dynamics and stablilty of fixed bed catalytic reactors. PhD thesis, University of Leeds.

1971

Newman, Michael Wesley (1971) Development of a mathematical model of a steam-reforming furnace. PhD thesis, University of Leeds.

1970

Thornton, John Michael (1970) Simulation and stability studies of a fixed bed catalytic reacator in which complex reactions occur. PhD thesis, University of Leeds.

Turner, Keith (1970) Model reduction of fixed bed catalytic reactors. PhD thesis, University of Leeds.

1969

Cresswell, David Leslie (1969) Mathematical modelling of fixed bed reactors. PhD thesis, University of Leeds.

This list was generated on Thu Oct 23 00:05:20 2014 BST.