Number of items at this level: 68.
Al-Hajjar, Mazen (2012) Wear of hard-on-hard hip prostheses: influence of head size, surgical position, material and function. PhD thesis, University of Leeds.
Suatermeister, Falko Alexander (2012) Piston ring lubrication-influence of sulphuric acid formation from high sulphur content fuel. PhD thesis, University of Leeds.
Wang, Manyi (2012) Application of Magnetic Resonance Imaging for in vitro investigation of meniscus and cartilage degeneration in the knee. PhD thesis, University of Leeds.
Taylor, Simon David (2012) An in-vitro medium term simulation of hip hemiarthroplasty. PhD thesis, University of Leeds.
Dyson, Christopher James (2011) Lubricant transport by misting and the link to degradation in the piston assembly of fired engines. PhD thesis, University of Leeds.
Ismail, Ismarullizam Mohd (2011) Inhibition of pitting on carbon steel. PhD thesis, University of Leeds.
Luo, Ji (2011) Production and characterisation of acellular porcine pulmonary heart valve conduits. PhD thesis, University of Leeds.
Abd Latif, Mohd Juzaila (2011) Characterisation and modelling of spinal facet joints. PhD thesis, University of Leeds.
Veremieiev, Sergii (2011) Gravity-driven continuous thin film flow over topography. PhD thesis, University of Leeds.
Cheong, Wen Choo (2010) Biomimetic approach to anti-fouling surfaces. PhD thesis, University of Leeds.
Jaimes, Diego Alejandro Angarita (2010) Development and applications of two and three component particle image velocimetry techniques for simultaneous measurement in multi-phase flows and automative fuel sprays. PhD thesis, University of Leeds.
Eves, James (2010) Methods for designing the next generation of aircraft architectures using topology optimisation. PhD thesis, University of Leeds.
Manfredi, Louise Rosanna (2010) The role of vibratory cues in affective responses to tactile textures. PhD thesis, University of Leeds.
Al Khaburi, Jawad Ameen Jawad (2010) Pressure mapping of medical compression bandages used for venous leg ulcer treatment. PhD thesis, University of Leeds.
Allsop, Matthew John (2010) Involving children in the design of healthcare technology. PhD thesis, University of Leeds.
Pawaskar, Sainath Shrikant (2010) Joint contact modelling of articular cartilage in synovial joints. PhD thesis, University of Leeds.
Lau, Beng Guey (2009) An intelligent prosthetic hand using hybrid actuation and myoelectric control. PhD thesis, University of Leeds.
Auckland, Robin Allen (2008) The impact of advanced driver assistance systems on vehicle dynamic performance and on the driver. PhD thesis, University of Leeds.
Chun, Wang (2007) Erosion-corrosion mitigation using chemicals. PhD thesis, University of Leeds.
Hattrell, Timothy (2007) A computational and experimental study of spark ignition engine combustion. PhD thesis, University of Leeds.
Ramli, Rahizar (2007) Dynamic simulation of semi-active suspension systems for durability analysis. PhD thesis, University of Leeds.
EI-Bayoumi, Mahmoud Attia M. (2007) Wheel Speed Distribution Control and its Effect on Vehicle. PhD thesis, University of Leeds.
Yan, Yu (2006) Corrosion and trib-corrosion behaviour of metallic orthopaedic implant materials. PhD thesis, University of Leeds.
Hewson, Robert William (2006) Tri-helical direct gravure coating. PhD thesis, University of Leeds.
Cooper, Nicholas James (2006) Active driveline and suspension control to improve vehicle handling. PhD thesis, University of Leeds.
Holt, Raymond John (2005) Integrating product and process design through decision analysis. PhD thesis, University of Leeds.
Ikin, John Bruce (2005) An experimental analysis of carrier layer flows. PhD thesis, University of Leeds.
Ormsby, Matthew P. (2005) Turbulent flame development in a high-pressure combustion vessel. PhD thesis, University of Leeds.
Goetz, Manuel (2005) Integrated powertrain control for twin clutch transmissions. PhD thesis, University of Leeds.
Khatami, Seyed Mohammad Ali Firouzabadi (2005) A decision support method for selecting design and manufacturing alternatives. PhD thesis, University of Leeds.
Vasudevan, Prakash (2005) An investigation into the effect of licker-in design on carding performance. PhD thesis, University of Leeds.
He, Junjie (2005) Integrated vehicle dynamics control using active steering, driveline and braking. PhD thesis, University of Leeds.
Jones, Lee Nicholas (2004) Modelling of turbulent swirling flows. PhD thesis, University of Leeds.
AI-Shahrany, Ali Saied (2004) Experimental and theoretical studies of combustion rates at high pressure. PhD thesis, University of Leeds.
Goodridge, Ruth Davina (2004) Indirect selective laser sintering of an apatite-mullite glass-ceramic. PhD thesis, University of Leeds.
Taylor, Christopher Martin (2004) Direct laser sintering of stainless steel : thermal experiments and numerical modelling. PhD thesis, University of Leeds.
Hauser, Carl (2003) Selective Laser Sintering of a Stainless Steel Powder. PhD thesis, University of Leeds.
Abdi Aghdam, Ebrahim (2003) Improvement and validation of a thermodynamic S.I. engine simulation code. PhD thesis, University of Leeds.
Jackson, Andrew Edward (2003) Intelligent mobility control of a hybrid electric off-road vehicle with individual wheel control. PhD thesis, University of Leeds.
Selby, Mark Albert (2003) Intelligent vehicle motion control. PhD thesis, University of Leeds.
Galvin, Alison Louise (2003) Interactive influences of crosslinking, counterface roughness and kinematics on the wear of crosslinked UHMWPE. PhD thesis, University of Leeds.
Sellier, Mathieu (2003) The numerical simulation of thin film flow over heterogeneous substrates. PhD thesis, University of Leeds.
Liu, Kexin (2002) Statistical description of turbulent reacting media. PhD thesis, University of Leeds.
Siegler, Blake (2002) Lap time simulation for racing car design. PhD thesis, University of Leeds.
Ash, Howard Alan Simon (2002) Correlation of subjective and objective handling of vehicle behaviour. PhD thesis, University of Leeds.
Richardson, Robert.C. (2001) Actuation and control for robotic physiotherapy. PhD thesis, University of Leeds.
Jamal, Naim Musa (2001) Finite element analysis of curl development in the selective laser sintering process. PhD thesis, University of Leeds.
Atzler, Frank (1999) Fundamental studies of aerosol combustion. PhD thesis, University of Leeds.
Kapur, Nikil (1999) Flow phenomena in fixed-gap and gravure roll coating systems. PhD thesis, University of Leeds.
Haq, Md Zahurul (1998) Fundamental studies of premixed combustion. PhD thesis, University of Leeds.
Chen, David (1997) Subjective and objective vehicle handling behaviour. PhD thesis, University of Leeds.
Rabeih, El-Adl Mohammed Aly (1997) Torsional vibration analysis of automotive drivelines. PhD thesis, University of Leeds.
Forster, Hamish (1996) Mixed and boundary lubrication in synovial joints. PhD thesis, University of Leeds.
Kwan, Ka Chun (1994) Mathematical modelling of premixed laminar methane-air flames. PhD thesis, University of Leeds.
Malone, Barry (1992) An experimental investigation of roll coating phenomena. PhD thesis, University of Leeds.
Firth, Gregory R (1991) The Performance of Vehicle Suspensions Fitted With Controllable Dampers. PhD thesis, University of Leeds.
Abouel-Nour, Aly (1989) Active Control of Vehicle Suspension. PhD thesis, University of Leeds.
Zhu, Guangrui (1988) A Theoretical and Experimental Study of the Tribiology of a Cam and Follower. PhD thesis, University of Leeds.
El-Razaz, Arafa Sayed Ahmed (1988) Lateral tyre forces on off-road surfaces. PhD thesis, University of Leeds.
Wright, Nigel George (1988) Multigrid solutions of elliptic fluid flow problems. PhD thesis, University of Leeds.
Nikravan, Bizhan (1987) Image data acquisition, processing and object recognition for use in a machine vision system. PhD thesis, University of Leeds.
Hassan, Samy Aly (1986) Fundamental Studies of Passive, Active and Semi-active Automotive Suspension Systems. PhD thesis, University of Leeds.
Hynes, John (1986) Turbulence effects on combustion in spark ignition engines. PhD thesis, University of Leeds.
Bedewi, Mohamed Amin Ahmed (1985) Non-steady state lubrication of counterformal contacts. PhD thesis, University of Leeds.
Medley, John.B. (1981) The lubrication of normal human ankle joints. PhD thesis, University of Leeds.
Abdel-Gayed, Ramzy G (1978) Mechanisms of turbulent flame propagation. PhD thesis, University of Leeds.
Graham, David (1970) The influence of abrasive surface topography on the basic mechanics of the metal grinding process. PhD thesis, University of Leeds.
Bowers, H.M. (1966) A study of gas-solids flows at very high speed. PhD thesis, University of Leeds.
This list was generated on Wed May 22 10:09:56 2013 BST.
