White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Browse by University and Academic Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Creators | No Grouping
Jump to: 2017 | 2016 | 2015 | 2014 | 2011 | 2010 | 1997
Number of items at this level: 68.

2017

Agbro, Edirin Bruno (2017) Experimental and Chemical Kinetic Modelling Study on the Combustion of Alternative Fuels in Fundamental Systems and Practical Engines. PhD thesis, University of Leeds.

Albatli, Abdulaziz Mohammed N. (2017) Provenance-Driven Diagnostic Framework for Task Evictions Mitigating Strategy in Cloud Computing. PhD thesis, University of Leeds.

Bello, Omoregbe (2017) Calcium Carbonate Scale Deposition Kinetics on Stainless Steel Surfaces. PhD thesis, University of Leeds.

Cowie, Andrew Richard (2017) Numerical Optimisation of Building Thermal and Energy Performance in Hospitals. PhD thesis, University of Leeds.

Manga, Musa (2017) The feasibility of co-composting as an upscale treatment method for faecal sludge in urban Africa. PhD thesis, University of Leeds.

Ocheme, Simon Eje (2017) Multiscale, multidimensional renewable energy generation and storage management system. PhD thesis, University of Leeds.

Sarkin Gobir Adiya, Zainab Ibrahim (2017) Effect of In-situ CO2 Sorption and Chemical Looping on Steam Reforming of Unconventional Gaseous Feedstocks. PhD thesis, University of Leeds.

Stephen, David Ojonimi (2017) Progressive collapse assessment of structures. PhD thesis, University of Leeds.

2016

Adu-Amankwah, Samuel (2016) Relationship between Microstructure, Durability and Performance of CEM X Composite Cements. PhD thesis, University of Leeds.

Al Ammari, Kareem (2016) Predicting Stiffness and Stress Variation of Saturated Clay Improved with Vibro Stone Columns and Evaluating its Effect on Improving Reinforced Foundations. PhD thesis, University of Leeds.

Anyikude, Kelechi Uzoma (2016) Analysis of Pollutants in Biochars and Hydrochars Produced by Pyrolysis and Hydrothermal Carbonization of Waste Biomass. PhD thesis, University of Leeds.

Azzawi, Itimad Dawood Jumaah (2016) Application of Synthetic Jet Actuators for Modification of Separated Boundary Layers. PhD thesis, University of Leeds.

Bux, Jaiyana (2016) Novel characterisation of concentrated dispersions by in situ acoustic backscatter systems. PhD thesis, University of Leeds.

Elsaadi, Mussa Farag Mussa (2016) Resonant Tunnelling Diodes for Millimetre and Sub-Millimetre Wave Mixing Applications. PhD thesis, University of Leeds.

Freeman, Helen Mary (2016) Characterisation of Radiation Damage in Nuclear Graphite at the Nanoscale. PhD thesis, University of Leeds.

Hamood, Ahmed Mohammed (2016) Two-stage thermoacoustic electricity generator with push-pull linear alternator. PhD thesis, University of Leeds.

Ibrahim, Adamu Mailafiya (2016) Predictive Spatial Models For Mineral Potential Mapping. PhD thesis, University of Leeds.

Ilori, Olusegun Mustapha (2016) Experimental and Numerical Investigations of Thermal-Fluid Processes in Oscillatory Flows. PhD thesis, University of Leeds.

Khaemba, Doris Nekesa (2016) Raman spectroscopic studies of friction modifier Molybdenum DialkyldiThioCarbamate (MoDTC). PhD thesis, University of Leeds.

Kibwami, Nathan (2016) Enhancing sustainable construction in the building sector of Uganda using embodied carbon accounting. PhD thesis, University of Leeds.

Liu, Jason Hon Wei (2016) Robotic Minimally Invasive Tools for Restricted Access Confined Spaces. PhD thesis, University of Leeds.

Marshall, Erica Clare (2016) Modelling the delivery of low carbon energy service in residential buildings. Integrated PhD and Master thesis, University of Leeds.

McNamee, Paula (2016) Torrefied Biomass for Large-Scale Electricity Generation. PhD thesis, University of Leeds.

Md Saad, Juniza (2016) Dry Reforming of Waste Plastics for Synthesis Gas Production. PhD thesis, University of Leeds.

Morris, Lisa-Dionne (2016) The Design of Operational Interfaces for Older Adults. PhD thesis, University of Leeds.

Ofune, MacDonald Azubuike (2016) Development of Single Cam Rig for Accurate Simulation of Valve Train Tribochemistry. PhD thesis, University of Leeds.

Olugbenga, Adeola Grace (2016) Micro-mechanical Properties of Niger Delta Sandstone Rock using Advanced Experiments and Multi-scale Modelling. PhD thesis, University of Leeds.

Pallan, Rachel Louise (2016) Characterisation and In Vitro Simulation of the Natural Hip. PhD thesis, University of Leeds.

Partridge, Susan (2016) Wear and rim damage of UHMWPE acetabular cups in total hip replacement. PhD thesis, University of Leeds.

Pohl, Julien (2016) Turbine Stator Well Heat Transfer and Design Optimisation Using Numerical Methods. PhD thesis, University of Leeds.

Riley, Susan Tania (2016) Combined Two-Dimensional Electron Gas and Artificial Spin Ice Structures. PhD thesis, University of Leeds.

Seboni, Lone (2016) Improving the existing project manager-to-project practice of a specific organization (organization A) in Botswana. PhD thesis, University of Leeds.

Smith, Jenny Thompson (2016) A 3D Culture Model to Investigate Cellular Responses to Mechanical Loading in Spinal Cord Injury. PhD thesis, University of Leeds.

Taleb, Wassim (2016) Nanotechnology for corrosion control Silsesquioxane based nanofillers for iron carbonate film enhancement. PhD thesis, University of Leeds.

Thaker, Tariq Ali (2016) Experimental and Nonlinear Finite Element Analysis of Double Skin Beam-Column Joints. PhD thesis, University of Leeds.

Utami, Issa Dyah (2016) An Approach to the Assessment of Resilience in Indonesian Fertiliser Industry Supply Networks. PhD thesis, University of Leeds.

Yahya, Samir Ghazi (2016) Design and evaluation of two-stage travelling wave thermoacoustic cooler. PhD thesis, University of Leeds.

2015

Bekhit, Amr (2015) Parallel Platform-Based Robot for Operation in Active Water Pipes. PhD thesis, University of Leeds.

Camacho Corzo, Diana Milena (2015) Crystallisation in Diesel and Biodiesel Fuel in Relation to their Solution Composition. PhD thesis, University of Leeds.

Chandrappan, Jayakrishnan (2015) Femtosecond laser plasma assisted rare-earth doping in silica for integrated optics. PhD thesis, University of Leeds.

Chauruka, Sandra Rutendo (2015) Effect of Milling on Size Reduction and Microstructural Changes to Gamma-Alumina. PhD thesis, University of Leeds.

Duffin, Elaine (2015) Modelling Decision Making under Uncertainty: Machine Learning and Neural Population Techniques. PhD thesis, University of Leeds.

Erete, James Ikpeme (2015) Aerodynamic and fuel dilution effects on non-premixed gas jet flames. PhD thesis, University of Leeds.

Fakhoury, Evan (2015) Determining the Contribution of Visual and Haptic Cues during Compliance Discrimination in the Context of Minimally Invasive Surgery. PhD thesis, University of Leeds.

Groves, Dawn (2015) Geometric Variances in Hip Osteoarthritis and Tribology of the Natural Hip. PhD thesis, University of Leeds.

Hua, Yong (2015) An Experimental Study of Corrosion for Long Distance Carbon Transportation Pipelines. PhD thesis, University of Leeds.

Kapadia, Zarashpe Zarir (2015) Quantifying the climate and air quality impacts of non-CO2 species from the combustion of standard and alternative fuels in aviation. Integrated PhD and Master thesis, University of Leeds.

McKendrick, Donna (2015) Physical Modelling of Turbulent Single- and Multi-phase, Impinging Jets using Particle Image Velocimetry (PIV). PhD thesis, University of Leeds.

Mudenda, Steven (2015) Development of a Solid State Planar Carbon Dioxide Sensor. PhD thesis, University of Leeds.

Payan, Oldouz (2015) Detailed modelling of fluid-particle interaction in sediment transport with applications in rivers. PhD thesis, University of Leeds.

Rai, Yugal (2015) In-situ Interface Chemical Characterisation of a Boundary Lubricated Contact. PhD thesis, University of Leeds.

Russell, Louise (2015) The Design and Development of an Intelligent Atraumatic Laparoscopic Grasper. PhD thesis, University of Leeds.

Tomlin, Gary Brian (2015) Gas Explosions in Dwellings: The Effects of Interconnected Rooms and Obstacles, and the Interpretation of Thermal Damage. PhD thesis, University of Leeds.

Vo, Chau Ky (2015) Detection of Stress Concentration Zones in Ferrous Material using Stand-off Magnetometry. PhD thesis, University of Leeds.

2014

Afkhami, Mohammad (2014) Particle Dispersion, Agglomeration and Deposition in Fully-Coupled Turbulent Channel Flow using Large Eddy Simulation and Discrete Element Method. PhD thesis, University of Leeds.

Aribo, Sunday (2014) Corrosion and erosion-corrosion behaviour of lean duplex stainless steels in marine and oilfield environments. PhD thesis, University of Leeds.

Bennett, James Thomas (2014) Development of bismuth ferrite derived piezoelectric ceramics for high temperature applications. PhD thesis, University of Leeds.

El-jummah, Abubakar Mohammed (2014) Impingement and impingement/effusion cooling of gas turbine components: conjugate heat transfer predictions. PhD thesis, University of Leeds.

Flyagina, Irina Sergeyevna (2014) Theoretical and experimental investigation of alternative cathode catalysts for proton exchange membrane fuel cells. PhD thesis, University of Leeds.

Lasfargues, Mathieu (2014) Nitrate based high temperature nano-heat-transfer-fluids: formulation & characterisation. PhD thesis, University of Leeds.

Lin, Yu-Sheng (2014) Tissue manipulation using nano-particles ferrofluids for minimal access surgical applications. PhD thesis, University of Leeds.

Momeni, Ali (2014) Micro-mechanical study of sand fabric during earthquake. PhD thesis, University of Leeds.

Osman, Niemah Izzeldin (2014) Energy efficiency in content delivery networks. PhD thesis, University of Leeds.

Soliman, Manar Mohamed AbdElMoneim Ibrahim (2014) Risk management in international construction joint ventures in Egypt. PhD thesis, University of Leeds.

Subhono, Boya (2014) Deploying nanotechnology for oil and gas flow assurance: Understanding the transport and penetration of nano-particles in porous media. PhD thesis, University of Leeds.

2011

Prongidis, Andreas (2011) On the use of hydrogen peroxide in ignition systems bioinspiration from the bombardier beetle. PhD thesis, University of Leeds.

2010

Stanko, Tatyana Sergeevna (2010) Modelling a sound radiated by a turbulent jet. PhD thesis, University of Leeds.

1997

Djilani, Mohamed-Cherif (1997) Interactive open-pit design using parameterization techniques. PhD thesis, University of Leeds.

This list was generated on Fri Aug 18 13:41:45 2017 BST.